|
Introduction
Sony Ericsson V800 Vodafone
In this part of the user guide you find a table of contents
which offers a general outline of the guide. To find more
specific information about your phone´s functionality,
please refer to the index at the back of the user guide.
You will also find information about what is included
in the box when you unpack your phone.
1
This is the Internet version of the user's guide. © Print only for private use.
1.2
Legal information
Sony Ericsson
UMTS-GSM 900/1800/1900
Second edition (July 2004)
This user guide is published by Sony Ericsson Mobile Communications AB, without any
warranty. Improvements and changes to this user guide necessitated by typographical
errors, inaccuracies of current information, or improvements to programs and/or equipment,
may be made by Sony Ericsson Mobile Communications AB at any time and without
notice. Such changes will, however, be incorporated into new editions of this user guide.
All rights reserved.
©Sony Ericsson Mobile Communications AB, 2004
Publication number: EN/LZT 108 7161 R3A
Please note:
Some of the services in this user guide are not supported by all networks.
This also applies to the GSM International Emergency Number 112.
Please contact your network operator or service provider if you are in doubt whether
you can use a particular service or not.
Please read the Guidelines for safe and efficient use and the Limited warranty chapters
before you use your mobile phone.
3
This is the Internet version of the user's guide. © Print only for private use.
Your mobile phone has the capability to download, store and forward additional content,
e.g. ringtones. The use of such content may be restricted or prohibited by rights of third
parties, including but not limited to restriction under applicable copyright laws.
You, and not Sony Ericsson, are entirely responsible for additional content that you download
to or forward from your mobile phone. Prior to your use of any additional content, please
verify that your intended use is properly licensed or is otherwise authorized. Sony Ericsson
does not guarantee the accuracy, integrity or quality of any additional content or any other
third party content. Under no circumstances will Sony Ericsson be liable in any way for
your improper use of additional content or other third party content.
The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use
of such marks by Sony Ericsson is under license.
Memory Stick™ and Memory Stick Duo™ are trademarks or registered trademarks
of Sony Corporation.
Motion Eye™ is a trademark or a registered trademark of Sony Corporation.
MusicDJ™ is a trademark or a registered trademark of Sony Ericsson Mobile
Communications AB.
Windows is either a registered trademark or a trademark of Microsoft Corporation in the U.S.
Mac OS is a trademark of Apple Computer, Inc., registered in the U.S. and other countries.
T9™ Text Input is a trademark or a registered trademark of Tegic Communications.
T9™ Text Input is licensed under one or more of the following: U.S. Pat. Nos. 5,818,437,
5,953,541, 5,187,480, 5,945,928, and 6,011,554; Canadian Pat. No. 1,331,057;
United Kingdom Pat. No. 2238414B; Hong Kong Standard Pat. No. HK0940329;
Republic of Singapore Pat. No. 51383; Euro.Pat. No. 0 842 463(96927260.8) DE/DK,
FI, FR, IT, NL, PT, ES, SE, GB; and additional patents are pending worldwide.
4
This is the Internet version of the user's guide. © Print only for private use.
Java™ and all Java based trademarks and logos are trademarks or registered
trademarks of Sun Microsystems, Inc. in the U.S. and other countries.
End-user license agreement for Sun™ Java™ J2ME™.
1. Restrictions: Software is confidential copyrighted information of Sun and title to all
copies is retained by Sun and/or its licensors. Customer shall not modify, decompile,
disassemble, decrypt, extract, or otherwise reverse engineer Software. Software
may not be leased, assigned, or sublicensed, in whole or in part.
2. Export Regulations: Software, including technical data, is subject to U.S. export control
laws, including the U.S. Export Administration Act and its associated regulations, and
may be subject to export or import regulations in other countries. Customer agrees
to comply strictly with all such regulations and acknowledges that it has the responsibility
to obtain licenses to export, re-export, or import Software. Software may not be
downloaded, or otherwise exported or re-exported (i) into, or to a national or resident
of, Cuba, Iraq, Iran, North Korea, Libya, Sudan, Syria (as such listing may be revised
from time to time) or any country to which the U.S. has embargoed goods; or (ii) to
anyone on the U.S. Treasury Department's list of Specially Designated Nations or the
U.S. Commerce Department's Table of Denial Orders.
3. Restricted Rights: Use, duplication or disclosure by the United States government
is subject to the restrictions as set forth in the Rights in Technical Data and Computer
Software Clauses in DFARS 252.227-7013(c) (1) (ii) and FAR 52.227-19(c) (2)
as applicable.
Part of the software in this product is copyright © SyncML initiative Ltd. (1999-2002).
All rights reserved.
Other product and company names mentioned herein may be the trademarks of their
respective owners.
Any rights not expressly granted herein are reserved.
5
This is the Internet version of the user's guide. © Print only for private use.
7
This is the Internet version of the user's guide. © Print only for private use.
8
This is the Internet version of the user's guide. © Print only for private use.
What´s in the box
1.5
In the box you will find:
• a phone
• a battery cover
• a battery
• a Memory Stick Duo™
• a Memory Stick Duo™ adaptor
• a charger
• a USB cable
• a portable stereo handsfree headset
• a cleaning pad
• a CD including PC software
• a Vodafone live! Quick start guide
• a user guide (you are reading it now)
10
This is the Internet version of the user's guide. © Print only for private use.
Basics
This chapter gives you the basics for getting started with your
phone. You´ll learn how to assemble and turn on your phone, and
then you can use the setup wizard to quickly set up your phone.
You´ll learn how to use call functions such as making voice
or video call, how to use the phonebook and how to enter text.
There´s also a quick overview of the parts of your phone, the
main functions of the keys, and what´s available in the menus.
11
This is the Internet version of the user's guide. © Print only for private use.
Getting to know your phone
2.1
Overview, phone closed
1
Light
2
Camera lens
1
2
3
4
5
6
7
3
Volume buttons
9
4
External display
5
Network and battery indicator light
Loudspeaker
10
6
7
Infrared port
8
Handsfree connector
Camera button. Press and hold to activate the camera.
Light button
9
10
11
12
USB port
Charger connector
11
12
8
12
This is the Internet version of the user's guide. © Print only for private use.
Overview, phone open
1
Speaker
2
Screen
3,10
4
Selection keys
Back key
5
Video call key
Voicemail key
Star key
1
2
6
7
8
Power on/off
Navigation key
Clear key
9
11
12
13
14
15
Media player key
Menu key
9
Silent key
10
11
12
13
14
15
3
4
5
6
7
8
Microphone
13
This is the Internet version of the user's guide. © Print only for private use.
Menu overview
2.2
1 Games
6 My items
Pictures
Videos
10 Connectivity
Online services
Bluetooth
Note: Some of the
1
4
2
5
3
6
2 Vodafone live!
(select to connect to
Vodafone live!)
menus are network
operator specific.
Available menu items
may vary, please review
the menus in your
phone to get a complete
overview.
Sounds
Infrared port
Themes
Web pages
Games
Applications
Other
Synchronization
Mobile networks
Data comm.
Internet settings
Streaming settings
Settings for Java™
Accessories
3 Media Player
4 Camera
7
8
9
5 Messaging
Create message
Inbox
Drafts
Outbox
Sent messages
Saved messages
Templates
Email
Messenger
Call voicemail
live! Studio
Settings
7 Organizer
10
11
12
Online services
Applications
Calendar
Tasks
Notes
11 Calls
12 Settings
General
Profiles
Alarms
Timer
Sounds & alerts
Volume
Ringtone
Silent mode
Increasing ring
Vibrating alert
Message alert
Key sound
Display
Calls
Divert calls
Main wallpaper
External wallpaper
Themes
Start-up screen
Sleep mode clock
Screen saver
Light
Time & date
Power save
Language
Voice control
Shortcuts
Stopwatch
Record sound
MusicDJ™
Calculator
Code memo
Manage calls
Time & cost
Show or hide no.
Open to answer
Handsfree
Locks
8 Phonebook
Options
New contact
Setup wizard
Phone status
Format Memory Stick
Master reset
9 Favourites*
* Use this menu to connect directly to the online pages of the Vodafone live! service you want, without having to navigate through the
portal. This menu is offline, so no online connection is created until you click on one of the links.
14
This is the Internet version of the user's guide. © Print only for private use.
2.3
Getting started
Assembling the phone
Before you can use your phone you need to:
• Insert the SIM card.
• Attach and charge the battery.
• Insert the Memory Stick Duo.
SIM card
When you register as a subscriber with Vodafone, you get a SIM (Subscriber Identity
Module) card. The SIM card contains a computer chip that keeps track of your phone
number, the services included in your subscription, and your phonebook information,
among other things.
Note:
If you have been using a SIM card in another phone, make sure that your information
is saved to the SIM card before you remove it from the other phone. For example, contacts
SIM card and battery information
Always turn off the phone and detach the charger before you insert or remove a SIM card.
Note:
It may take up to 30 minutes before the battery icon appears when charging.
15
This is the Internet version of the user's guide. © Print only for private use.
To insert the SIM card and the Memory Stick Duo and charge the battery
1. Remove the battery cover as shown in the picture.
2. Slide the SIM card into its slot under the silvery holder, making sure that the gold
contacts of the SIM card are facing down, and the cut-off edge is aligned correctly.
Insert the Memory Stick Duo in the slot.
3. Place the battery on the back of the phone with the label side up and the connectors
facing each other.
4. Place the battery cover as shown in the picture and slide it into place.
5. Connect the charger to the phone at the flash symbol. The flash symbol on the
charger plug must face upwards.
6. It may take up to 30 minutes before the battery icon appears on the screen.
7. Wait approximately 4 hours or until the battery icon indicates that the battery is fully
charged. If you do not see the battery icon after this time, press any key on the keypad
to activate the screen.
8. Remove the charger by tilting the plug upwards.
Note:
To remove the SIM card, you have to remove the battery first.
Memory Stick Duo™
Sony Memory Stick Duo gives you extra storage capacity for content such as pictures,
music and video clips.
With the Memory Stick Duo you can share your saved information by moving or copying
it to other Memory Stick Duo compatible devices.
16
This is the Internet version of the user's guide. © Print only for private use.
You can also use it as a portable memory for office documents, and move documents
between the phone and a PC using the Memory Stick, Bluetooth™ wireless technology,
To insert and remove the Memory Stick Duo™
1. Insert the Memory Stick Duo in the slot as shown in %16 To insert the SIM card and
the Memory Stick Duo and charge the battery.
2. Remove the battery cover and slide out the Memory Stick Duo to remove it.
Memory Stick Duo adaptor
Your phone comes with the shorter memory stick variant, Memory Stick Duo. Use the
Memory Stick Duo adaptor when using your Memory Stick Duo in a device equipped
with a regular-sized Memory Stick. Insert your Memory Stick Duo according to the
picture on the adaptor.
PIN (Personal Identity Number)
You may need a PIN (Personal Identity Number) to activate the services in your phone.
Your PIN is provided by Vodafone. When you enter your PIN, the digits appear as ****,
unless your PIN starts with the same digits as an emergency number, for example 112.
This is so that you can see and call an emergency number without entering a PIN,
%27 Emergency calls.
If you make a mistake while entering your PIN, delete the number by pressing
.
Note:
If you enter the wrong PIN three times in a row, the SIM card is blocked and the message
PIN blocked appears. To unblock it, you need to enter your PUK (Personal Unblocking Key),
17
This is the Internet version of the user's guide. © Print only for private use.
Available services
Some services and functions described in this user guide are network- or subscription-
dependent. Because of this, all menus may not be available in your phone. Please consult
Vodafone Customer Care for more information about your subscription.
Turning on the phone and making calls
Make sure that the phone is charged before you turn it on. When you have turned the
phone on, you can use a setup wizard to quickly and easily prepare your phone for use.
To turn on the phone
1. Open the phone, press and hold
.
Setup wizard
2. Enter your SIM card PIN, if you have one.
You can use the setup wizard
to help you get started with the
basic settings in your phone.
The wizard also gives you tips
on how to use the keypad.
3. At first start-up, select the language you want for your phone menus.
} Yes if you want the setup wizard to help you get started, and follow the instructions
that appear to complete the setup.
To make and receive calls
You can start the wizard from
the menu system at any time.
} Settings } the
• Enter the phone number (with international prefix and area code if applicable). } Call
to make a voice call, or press
to make a video call. } End call to end the call.
• When the phone rings, open the phone and press Yes, or simply open the phone
General tab } Setup wizard.
18
This is the Internet version of the user's guide. © Print only for private use.
2.4
Keys and navigation
Use
to enter the desktop. The main menus are shown as icons on the desktop.
What is the standby screen?
Some submenus include tabs that appear on the screen. Scroll to a tab with the
navigation key and select an option.
The standby screen is displayed
when you are not calling or using
the menus. This is where you
can see, for example, your
operator’s name, the time and
the date. At the top of the standby
screen you find the status bar.
Press to go to the desktop where the main menu icons
are. In a menu, press to return to the desktop. During
an ongoing call or while browsing the Internet, press
to return to the desktop.
Press to select highlighted items.
Move through menus and tabs.
Press to go back one level in the menus.
Press and hold to return to standby.
Press to end a function.
Press to select the options shown immediately
above these keys on the screen.
Press to delete items, such as pictures, sounds and
contacts.
Press to make a video call or to enter video call mode.
19
This is the Internet version of the user's guide. © Print only for private use.
Press to start the media player.
What is the desktop?
In standby, press to view status information
To reject a call, quickly press twice when receiving
a call.
To turn off the ringtone when receiving a call,
press once.
The desktop is where all the
main menu icons are. From
standby you reach the desktop
by pressing
of the desktop you find the
status bar.
. At the top
During a call, press to increase the volume.
When using the media player (also when minimized)
with closed phone, press to increase the volume –
press and hold to skip back one track.
When using the camera, press to increase brightness.
I
n standby, press to view the next calendar appointment.
To reject a call, quickly press twice when receiving
a call.
More options
To turn off the ringtone when receiving a call,
press once.
During a call, press to decrease the volume.
When in the menus, } More
to enter a list of options.
When using the media player (also when minimized)
with closed phone, press to decrease the volume –
press and hold to skip forward one track.
There are different alternatives
in the list of options depending
on where you are in the menus.
When using the camera, press to decrease brightness.
Press and hold to call your voicemail service (if set)
20
This is the Internet version of the user's guide. © Print only for private use.
Press and hold to set the phone to silent. The alarm
signal rings even if the phone is set to silent.
To turn off the ringtone when receiving a call, press
once.
During a call, press to mute the microphone.
-
-
Press and hold any of these keys to reach a contact
beginning with a specific letter.
To speed dial, press any of these keys and press
Phone language
Getting back to your language
Most SIM cards automatically set the language used in the menu to the language of the
country where you bought your SIM card. If this is not the case, the predefined language
is English. If you use the setup wizard to help you get started with your phone, you will
You can always choose
Automatic language by
pressing
8888
in standby.
Shortcuts
You can always choose English
A quicker way to move through the menus is to use shortcuts. You can use desktop
shortcuts to quickly get to a menu, and you can use the predefined standby shortcuts
to quickly reach certain functions.
by pressing
standby.
0000
in
Using desktop shortcuts
Enter the menus by pressing
you want to go. For example, to reach the fifth menu item, press
tenth, eleventh and twelfth menu items, press and
To get back to standby, press and hold
and then enter the number of the menu to which
. To reach the
respectively.
,
.
21
This is the Internet version of the user's guide. © Print only for private use.
Using standby shortcuts
You can use the predefined shortcuts and use the navigation keys to go directly to that
function in standby.
Predefined standby shortcuts
In your Vodafone live! phone, the following shortcuts are predefined in standby:
Getting help
A list of shortcuts including setting the phone to silent, selecting profile, turning on/off
More information, explanations
or tips about selected features,
menus or functions are available
in your phone.
Bluetooth and turning on/off infrared,
Phonebook,
Create message and
Calendar.
To edit a standby shortcut
1. In standby, press
} Edit.
} Edit shortcuts and select which shortcut you want to edit,
Scroll to the menu item } Info.
2. Scroll to a function that you want to create a new shortcut to } Shortcut.
What is shown in the external display
When the phone is closed, you can use the external display for a number of things. Use
it to view time and date, battery status, network operator, who is calling and song titles
when you play music. You can also view the next meeting in the calendar by pressing
the
volume key from standby. The display lights up at incoming calls and alerts.
When using the camera, you can use the external display as viewfinder. You can also
22
This is the Internet version of the user's guide. © Print only for private use.
2.5
Calling
Making calls
Before you can make or receive any calls, you must turn on the phone and be within
you have to be within range of a 3G network. 3G service is available when the 3G icon
Networks
When you turn on the phone, it automatically selects your home network if this is within
range. If it is not within range, you may use another network, provided Vodafone has an
agreement that allows you to do so. This is called roaming.
You can select the network you want to use, or you can add a network to your list
of preferred networks. You can also change the order in which networks are selected
during an automatic search. For all such options } Connectivity } Mobile networks.
If you are in an area where there is no 3G service available, you can set the phone not
to search for a 3G network to save battery power, } Connectivity } Mobile networks
} GSM/3G networks.
More ways of making calls
You can call numbers from
the call list and the phonebook,
To make a call
1. Enter the phone number (with international and area code if applicable).
2. } Call to make a voice call, or More } Make video call.
3. } End call to end the call.
You can also use your voice to
23
This is the Internet version of the user's guide. © Print only for private use.
To change the speaker volume during a call
Use the volume buttons on the side of the phone to increase or decrease the speaker
volume during a call.
To use the loudspeaker during a voice call
1. Press
2. Press
Note:
and select Turn on speaker to turn on the loudspeaker.
and select Turn off speaker to turn off the loudspeaker.
Do not hold the phone to your ear while using the loudspeaker. This could damage
your hearing.
To turn off the microphone during a call
1. Press
} Mute microphone, or press and hold
until the icon for muted
microphone is displayed.
2. } Unmute, or press and hold
again, to resume the conversation.
Receiving voice calls
When you receive a call, the phone rings and Answer? is displayed.
You can answer a call by opening the phone or by using the keys. If you do not want
to answer calls by opening the phone, you can deactivate this function.
Voice control
You can use your voice
to answer or reject calls,
%49 Voice answering.
If your subscription includes the Calling Line Identification service and the caller’s number
is identified, the number is displayed. If not, Unknown is displayed.
If you have saved the number in the phonebook, the name and number are displayed.
If you have assigned a picture to a contact, the picture is also displayed. If the number
is a restricted number, Withheld is displayed.
24
This is the Internet version of the user's guide. © Print only for private use.
To activate or deactivate open to answer
} Settings } the Calls tab } Open to answer and select On or Off.
To answer a call
Open the phone, press Yes, or simply open the phone if Open to answer is On.
To reject a call
• When the phone is open, press No or close the phone.
• When the phone is closed, quickly press a volume button twice.
Missed calls
If you have missed a call, Missed calls: appears in standby, and in the external display
if the phone is closed, indicating the number of missed calls. } Yes to view the missed
calls in the call list. If you want to view the missed calls later } No.
To check your missed calls
1. From standby } Calls and scroll to the missed calls tab. Use
,
,
and
to scroll between the tabs.
2. To call a number from the list, scroll to the number } Call.
Automatic redialling
To redial a number
If the connection of the call failed and Retry? is displayed } Yes.
Note:
Do not hold the phone to your ear while waiting. When the call is connected, the phone
gives a loud signal.
25
This is the Internet version of the user's guide. © Print only for private use.
The phone redials the number up to ten times or until:
• The call is connected
• You press Cancel
• You receive a call
Automatic redialling is only available for voice and video calls, not for data calls.
Using the desktop during a call
During a call you can go to the desktop to use other functions. For example, if your
subscription and network supports this, you can connect to the Internet during a call.
To go to the desktop during a call
1. Press
.
2. Select a menu on the desktop to use a function.
3. To return to the desktop or the ongoing call view, press
one or more times.
Making international calls
When you make an international call, the + replaces the international prefix number
of the country from which you are calling. You can make a call from abroad, using
another network, provided Vodafone has an agreement with that network.
To make international calls
1. Press and hold
until a + sign appears on the screen.
2. Enter the country code, area code (without the leading zero) and phone number } Call.
26
This is the Internet version of the user's guide. © Print only for private use.
Emergency calls
Your phone supports international emergency numbers, for example, 112 and 911.
This means that these numbers can normally be used to make an emergency call in any
country, with or without a SIM card inserted, if a GSM or 3G network is within range.
Note:
Vodafone may have saved additional local emergency numbers on the SIM card.
To make an emergency call
Enter, for example, 112 (the international emergency number) } Call.
To view emergency numbers
} Phonebook } Options } Special numbers } Emergency numbers.
27
This is the Internet version of the user's guide. © Print only for private use.
Video call
2.6
With video call, you can see the person you are talking to on your screen.
Video call demo mode
3G network icon
When the 3G network icon is
displayed in the status bar at
the top of the screen, you are
able to make and receive video
calls to and from other 3G
telephones.
You can use the video call functions without making a call, if you, for example,
want to prepare a view and check how it looks before calling. Press
Most video call functions are available in the demo mode.
To make a video call
.
1. Press
when 3G service is available.
2. Enter the phone number and press Call. To retrieve a phone number from the
phonebook } Call... } Contacts and scroll to the phone number you want to call
Video calls
} Call or press
.
You can also make video calls
from standby or from other
applications, such as the
phonebook or messages.
To turn off or on the camera of the outgoing video
You can turn off and on the camera during a video call by pressing Camera.
To adjust the brightness of the outgoing video
In standby, } Calls, highlight
Press
to decrease the brightness, or
to increase the brightness of the outgoing
a number and press
.
video picture.
In the phonebook, highlight
a number and press
In a message, highlight
a number in the message
.
To zoom the outgoing video in or out
Press
to zoom in the outgoing video picture 2x. Press
to zoom out again.
again to zoom 4x.
and press
.
Press
28
This is the Internet version of the user's guide. © Print only for private use.
To accept an incoming video call
Press Yes or open the phone to accept the video call (if Open to answer is activated),
To end a video call
During an ongoing video call, press End call.
Video call options
Press
to view, and select from, the following options:
• Turn off speaker/Turn on speaker – turn off and on the incoming sound during
a video call.
• Mute microphone/Unmute mic. – turn off and on the microphone during a video
call (this option is available during calls).
• Switch pictures – choose between showing the incoming or the outgoing video
in full size display.
• Hide small pic./Show small pic. – choose if you want to hide or show the small
picture.
• Night mode – use when the lighting conditions are poor. This setting affects the
outgoing video.
• Advanced – to view, and select, the following options:
• Answer mode – choose whether the camera should be on or off when you answer
a video call. If you answer with the camera turned off, you can easily turn on the
camera by pressing Camera.
• Alternative pic. – this picture will be shown to the other party when you have
turned off the camera.
• Camera quality – select what picture quality to use for the outgoing video.
This setting will take effect at the next call – not during an ongoing call.
29
This is the Internet version of the user's guide. © Print only for private use.
• Mirror image – you will see a mirror image of the outgoing video. If you turn
mirror image on, you will see yourself as you would in a mirror. This setting only
affects the picture when the camera lens is pointing inwards.
• Contacts – select a contact to view during an ongoing call – useful, for example,
when you want to check a number or an email address for a contact (this option
is visible during calls).
• Transfer sound – transfer the sound to and from handsfree equipment using
Bluetooth wireless technology.
• Demo clip – turn demo clip on or off.
30
This is the Internet version of the user's guide. © Print only for private use.
2.7
Entering text
Entering letters
There are two ways of entering letters, for example, when writing a message or writing
a name in the phonebook:
• Multitap text input
You press each key as many times as needed to show the letter you want.
• T9™ Text Input
The T9 Text Input method uses a built-in dictionary to recognize the most commonly
used word for each sequence of key presses. This way, you press each key only once,
even if the letter you want is not the first letter on the key.
Writing languages
Before you start entering letters, you need to select the languages that you want to use
when writing.
Switching writing language
To select writing language
When writing, you can switch
to one of your selected languages
1. } Settings } the General tab } Language } Writing language.
2. Scroll to each language that you want to use and mark it. } Save to exit the menu.
To enter letters using multitap text input
by pressing and holding
.
1. To enter text, you have to be in a function where text input is possible, for example
} Messaging } Create message } SMS.
2. Press the appropriate key,
–
,
or
, repeatedly until the character
you want appears on the screen. You can see which characters you can choose from
for a specific key in the box in the top right corner of the screen.
31
This is the Internet version of the user's guide. © Print only for private use.
Example:
• To enter an ‘A’, press
• To enter a ‘B’, quickly press
once.
twice.
• To shift between capital and lower-case letters, press
• You can use the volume buttons as a shortcut to certain letters. To enter a ‘B’, press
and hold and press . To enter a ‘C’, press and hold and press
, then enter the letter.
.
To enter letters using T9 Text Input
1. To enter text, you have to be in a function where text input is possible, for example
} Messaging } Create message } SMS.
2. For example, if you want to write the word “Jane”, press
,
,
,
.
3. If the word shown is the one you want, press
To accept a word without adding a space, press
to accept and add a space.
. If the word shown is not the
one you want, press
and add a space by pressing
or
repeatedly to view alternative words. Accept a word
.
4. Continue writing your message. To enter a full stop or other punctuation marks,
press and then or repeatedly. Accept by pressing
.
To add words to the T9 Text Input dictionary
1. While entering letters } More } Spell word.
2. Edit the word by using multitap input. Navigate between the letters with
and
.
To delete a character, press
. To delete the entire word, press and hold
.
3. When you have edited the word } Insert. The word is added to the T9 Text Input
dictionary. Next time you enter this word using T9 Text Input, it will appear as one
of the alternative words.
32
This is the Internet version of the user's guide. © Print only for private use.
To select another writing method
Before, or while entering letters, press and hold
Options when entering letters
to select another writing method.
} More to view a list of options. The list may contain some or all of the following:
• Add symbol – symbols and punctuation marks such as ? and , are shown.
Move between the symbols by using
,
,
and
.
• Add item – pictures, melodies and sounds.
• Spell word – for T9 Text Input only. Edit the suggested word by using multitap
text input.
• Text format – change style, size and alignment.
• Writing language – a list of available languages is shown.
• Writing method – a list of methods available for the current language is shown.
• Dictionary (T9) – turn T9 Text Input on or off.
• Word suggestions – select to view, or not, word suggestions when writing a word.
• My words – manage the words that you have added to the dictionary.
• National chars. – turn off language-specific characters to save space. This option
appears only for some writing languages.
Some keys you can use when entering letters
Shift between capital- and lower case letters
Delete letters and numbers
press
press
Shift between multitap or T9 Text Input methods
Select writing languages
press and hold
press and hold
Enter numbers
press and hold any
of the number keys
33
This is the Internet version of the user's guide. © Print only for private use.
Enter the + sign
press and hold
Enter a p (pause)
press and hold
when entering
numbers or saving
codes in number
fields
Using multitap text input
Reach the second letter or character of a key
press and hold the
volume button
and press any of the
number keys
Reach the third letter or character of a key
press and hold the
volume button
and press any of the
number keys
Enter a space
press
Using T9 Text Input
View alternative words
Accept a word and add a space
Enter a full stop
or
press
press
View alternative punctuation marks
press
or
, then
repeatedly
34
This is the Internet version of the user's guide. © Print only for private use.
2.8
My Items
Items such as pictures, videos, sounds, themes, games, applications and Web pages
are saved as files in folders. All files that the phone cannot recognize are saved in the
Other folder. The phone has several predefined folders and subfolders. You can also create
your own subfolders in the predefined folders, to which you can move your saved files.
Using items
If you highlight a file in the
pictures, videos or sounds
folders } More } Use, you
can use the file for several
purposes.
When handling files, you can select several or all files in a folder at the same time and
send them, or delete them or move them to a folder. You can move and copy files between
the Memory Stick Duo and the phone. Icons indicate where the files are saved.
All files, except some copyright-protected files, are automatically saved on the Memory
Stick Duo. If Memory Stick full appears, you cannot save anything on the Memory Stick
Duo until you have deleted some of the content from the Memory Stick Duo or moved
it to the phone memory. If the Memory Stick Duo is not inserted in the phone, files will
be saved to the phone if there is enough memory left.
You can, for example, set
a sound as ringtone, set
a picture as screen saver,
or add a picture to a contact.
To move a file to a folder
1. } My items and select a folder.
2. Scroll to a file, for example, a picture that you want to move } More } Manage files
} Move to folder.
3. Select the folder you want to move the file to, or select New folder and name the
folder } OK.
35
This is the Internet version of the user's guide. © Print only for private use.
To create a subfolder
1. } My items and open a folder.
Sending files from a folder
2. } More } New folder.
To send a file, just highlight
the file } More } Send.
3. Enter a name for the folder, } OK to save the folder.
To select several files
To send several files, highlight
a file } More } Mark several,
scroll and select more files by
pressing Mark, then } More
} Send, and select send
method.
1. } My items and select a file } More } Mark several.
2. Scroll and select more files by pressing Mark or Unmark.
To select all files in a folder
} My items and select a file } More } Mark all, or Unmark all to remove the selection.
To copy a file to the phone
1. Scroll to the file, for example, a sound, that you want to copy, } More } Manage files.
2. Select Copy to phone. Now you have two files with the same name, but different
icons in front of them, telling you where the file is saved.
To copy a file to the Memory Stick Duo
Follow the same steps as for copying a file to the phone but select Copy to ext. mem
instead of Copy to phone.
36
This is the Internet version of the user's guide. © Print only for private use.
To move or copy files to a PC
To delete a file from the Memory Stick Duo
Scroll to the file you want to delete from the Memory Stick Duo and press
.
Formatting a Memory Stick Duo™
You can format a Memory Stick Duo if you want to delete all information from it,
or if it has been corrupted.
To format the Memory Stick Duo
} My items and highlight a folder } More } Format ext. mem.
File information
Items that are downloaded, or received using Bluetooth wireless technology, the infrared
port, text or picture messages may be copyright-protected. If a file is protected, you may
not be able to copy or send that file. You can select to view information for the file.
Note:
If you want to play a sound or video file, it has to be copyright-protected (OMA DRM
Separate Delivery). Please consult Vodafone Customer Care for more information.
37
This is the Internet version of the user's guide. © Print only for private use.
Phonebook
2.9
You can save your phonebook information in the phone memory, as contacts, or on the
SIM card, as names and numbers. You can choose which phonebook – contacts or SIM
numbers – is shown as default.
Phonebook options
Contacts or SIM numbers as default phonebook
For useful information and
settings in the phonebook
} Phonebook } Options.
If you select to use contacts as default, your phonebook will show all information saved
in contacts. If you select SIM numbers as default, the phonebook will show names and
numbers saved on the SIM card.
To select contacts or SIM numbers as your phonebook
1. } Phonebook } Options } Advanced } Default phonebook.
2. Select Contacts or SIM numbers.
Contacts
Contacts is like an address book, in which you can store names, phone numbers and
email addresses. You can also add pictures, ringtones and personal information, such
as Web and street addresses to the contacts.
When you add information to a contact, the information is organized under five tabs.
Use
,
,
and
to scroll between the tabs and their information fields.
SIM numbers
On your SIM card, you can save entries as a name with a single number. The number
of entries you can save depends on the amount of memory available on the SIM card,
see } Phonebook } Options } Advanced } Memory status.
38
This is the Internet version of the user's guide. © Print only for private use.
Note:
Contact Vodafone Customer Care for more information.
Send a message to a contact
from the phonebook
To add a contact
1. } Phonebook } New contact } Add.
2. Enter the name directly or press Add and enter the name } OK.
3. Enter the number directly or press Add and enter the number } OK.
4. Select a number type.
1. } Phonebook. Scroll to,
or enter the first letters of the
contact you want to send
a message to.
2. When the contact you
want o send a message to
5. Scroll between the tabs and select fields to enter more information. To enter symbols,
for example, @ in an email address } Symbols and select a symbol } Insert.
is highlighted, press
or
6. When you have entered the information you want for your contact } Save.
to scroll to a number or an
email address for the contact.
To add a SIM number
3. } More } Send message.
If SIM numbers is your default phonebook, follow the same steps as for adding a contact.
You can add only name and number to the SIM numbers phonebook.
4. Select message type, and
create your message.
Pictures and personal ringtones
You can add a picture and a personal ringtone to a phonebook contact. When that person
calls, the picture is displayed (provided your subscription supports the Calling Line
Identification service) and the ringtone is played.
To add a picture or a ringtone to a contact
1. } Phonebook and select the contact you want to add a picture or ringtone to } More
} Edit contact.
2. Use
,
,
and to scroll to the relevant tab and select Picture: or Ringtone:
} Add. This takes you to My items.
3. Select a picture or a sound. } Save to save the contact.
39
This is the Internet version of the user's guide. © Print only for private use.
Calling from the phonebook
To send a message to several
recipients from the phonebook
You can call one of the numbers saved for one of your contacts, or a number on your
SIM card. If contacts is the default phonebook, you can choose to call from contacts
or from the SIM card. If SIM numbers is the default phonebook, you can only call the
numbers on the SIM card.
1. } Phonebook. Scroll
to, or enter the first letters
of a contact you want to send
a message to.
To call a contact
1. } Phonebook. Scroll to, or enter the first letters of the contact you want to call.
2. When the contact you want to call is highlighted } Call. If the contact has more than
2. } More } Mark several.
one number, press
when the contact is highlighted.
or
to select the number. To make a video call, press
3. When the contact you
want to message is highlighted,
press
or
to scroll to a
To call a SIM number
number or an email address
of that contact.
1. } Phonebook }. If SIM numbers is the default phonebook, select the name and
number you want to call from the list } Call.
4. Scroll and select
more numbers or email
addresses of contacts by
pressing Mark.
2. If Contacts is the default phonebook } Phonebook } Options } SIM numbers
and select the name and number you want to call from the list } Call.
Ask to save
5. When the numbers or
email addresses you want to
message are marked } More
} Send message.
When you end a call, the phone can prompt you to add a phone number or email
address to your phonebook.
To activate ask to save in contacts
} Phonebook } Options } Advanced } Ask to save } On.
6. Select message type, and
create your message.
Updating the phonebook
You can easily update and edit any information in your phonebook.
40
This is the Internet version of the user's guide. © Print only for private use.
To edit a contact
Adding numbers
1. } Phonebook and select a contact } More } Edit contact.
You can update your
2. Use
want to edit } Save.
,
,
and
to scroll to the relevant tab and edit the information you
phonebook with numbers that
you have dialled and with
numbers from calls that you
have received or missed.
To edit SIM numbers
1. If SIM numbers is your default phonebook } Phonebook and the number you
want to edit. (If contacts is your default phonebook } Phonebook } Options
} SIM numbers. Select the name and number you want to edit.)
1. } Calls from standby and
select a tab in the call list.
2. } More } Edit and edit the name and number.
To delete a contact or a SIM number
2. Scroll to the number you
want to add to the phonebook
} More } Save number.
} Phonebook and scroll to the contact or SIM number you want to delete, press
To delete all contacts
.
3. Add the number to a new
contact or to an existing contact.
1. } Phonebook } Options } Advanced } Delete all contacts.
2. } Yes and enter the phone lock code } OK. The default phone lock code is 0000.
Names and numbers that are saved on the SIM card are not deleted.
Default items for contacts
The default item is displayed first for the contact, and is therefore quicker to reach.
You can set the default item – a phone number, email address or a Web address –
to be displayed first for each contact.
To set the default item for a contact
1. } Phonebook and scroll to a contact } More } Default number.
2. Select the phone number, email address or Web address that you want as default item.
41
This is the Internet version of the user's guide. © Print only for private use.
Copying contacts
You can copy names and numbers to and from your contacts and the SIM card.
Choose if you want to copy all SIM numbers, or just one SIM number.
Note:
When you select to copy all contacts from the phone to the SIM card, all existing
information on the SIM card will be replaced.
You can also set the phone to save entries automatically to the SIM card. With this setting,
names and phone numbers that you add or edit in the phonebook are also saved on the
SIM card. The number of phone numbers that can be saved depends on the type of SIM card
.
To copy names and numbers to the SIM card
1. } Phonebook } Options } Advanced } Copy to SIM.
2. Select Copy all or Copy a number.
To copy SIM numbers to contacts
1. } Phonebook } Options } Advanced } Copy from SIM.
2. Select Copy all or Copy a number.
To automatically save names and phone numbers to the SIM card
1. } Phonebook } Options } Advanced } Auto save on SIM.
2. Select On.
Sending contacts
You can send contacts using Bluetooth wireless technology, the infrared port or a text
or picture message.
42
This is the Internet version of the user's guide. © Print only for private use.
To send a contact
1. } Phonebook and select a contact } More } Send contact.
2. Select a transfer method.
To send all contacts
} Phonebook } Options } Advanced } Send all contacts and select a transfer
method.
Checking the memory
With the memory status function in your phonebook, you can check how many positions
you have left in the phone memory and SIM memory.
To check the memory
} Phonebook } Options } Advanced } Memory status.
Synchronizing contacts
You can back up and synchronize your contacts with the Vodafone live! network.
1. } Phonebook } Options } Sync. contacts.
2. If you have more than one account, select which account to use } Select. If you
Note:
Visit www.vodafone.com for details. This service is not available for all countries.
43
This is the Internet version of the user's guide. © Print only for private use.
Call list
2.10
The numbers of the last 30 calls that you have made are saved in the call list. If your
subscription includes the Calling Line Identification service and the caller’s number
is identified, the call list also shows the numbers of answered and missed calls.
In addition to the call list with all numbers, there are also separate lists for dialled,
answered and missed calls, organized under tabs.
To call a number from the call list
1. } Calls from standby and select a tab.
2. Scroll to the name or number you want to call } Call.
To make a video call from the call list
1. } Calls from standby and select a tab.
2. Scroll to the number you want to call } More } Make video call or press
when the number is highlighted.
To add a number from the call list to the phonebook
1. } Calls from standby and select a tab.
2. Scroll to the number you want to add } More } Save number.
3. } New contact to create a new contact, or select an existing contact to add the
number to a contact already in the phonebook.
To clear the call list
} Calls and scroll to the tab with all calls } More } Delete all.
44
This is the Internet version of the user's guide. © Print only for private use.
2.11
Speed dialling
You can save the phone numbers that you want to reach easily in positions 1-9 in your
phone and on your SIM card.
To speed dial
From standby, enter the position number and } Call.
To set the position number for speed dialling
1. } Phonebook } Options } Speed dial and scroll to the position to which you want
to add a phone number } Add.
2. Select a number.
To replace a number in the speed dial list
1. } Phonebook } Options } Speed dial.
2. Scroll to the number } Replace. Select a new number for the position.
Note:
To speed dial with contacts as default phonebook, numbers have to be saved as contacts,
and to speed dial with SIM numbers as default phonebook, numbers have to be saved
on your SIM card.
45
This is the Internet version of the user's guide. © Print only for private use.
Voicemail
2.12
If your subscription includes an answering service, callers can leave a voicemail
message when you cannot answer a call.
Receiving a voicemail message
Depending on your network operator, you are informed that someone has left a message
by a text message or by a voicemail icon. Press Yes to read the text message and call
the voicemail service to listen to the message.
Calling your voicemail service
You can easily call your voicemail service by pressing and holding
. If you have not
set your voicemail number, you will be asked if you want to enter the number. } Yes to
enter the number. You get the number from your service provider.
To enter the number to your voicemail service
} Messaging } Templates } Voicemail number.
46
This is the Internet version of the user's guide. © Print only for private use.
2.13
Voice control
With your phone, you can use your voice to:
• Voice dial – call someone by saying the name.
• Activate voice control by saying a “magic word”.
• Answer and reject calls when using a handsfree kit.
Voice commands can only be saved in the phone, not on the SIM card. When recording,
make sure that you are in a quiet environment and try to use names that are distinct
from each other, %51 Tips when recording and using voice commands.
Before voice dialling
You must first activate the voice dialling function and record your voice commands.
An icon appears next to a phone number that has a voice command.
Note:
Turn the media player off before using voice dialling. Scroll to the media player and
press
to turn off.
To activate voice dialling and record names
1. } Settings } the General tab } Voice control } Voice dialling } Activate } Yes
} New voice } Add and select a contact.
2. If the contact has more than one number, use
and
to view the numbers. Select
the phone number to which you want to add the voice command. Now you are going
to record a voice command such as “John mobile” for the phone number you selected.
3. Instructions appear. Wait for the tone and say the command that you want to record.
The voice command is played back to you.
47
This is the Internet version of the user's guide. © Print only for private use.
4. If the recording sounds ok } Yes. If not } No and repeat step 3.
5. To record another voice command for a contact } New voice } Add again and
repeat steps 2-5 above.
Caller name
You can choose whether you want to hear the recorded contact name when you receive
a call from that contact.
To turn the caller name On or Off
} Settings } the General tab } Voice control } Play caller name.
Voice dialling
You can voice dial by saying a pre-recorded voice command. Start voice dialling from
standby using the phone, a portable handsfree, a Bluetooth headset or by saying your
magic word.
To make a call from the phone
1. From standby, press and hold one of the volume buttons.
2. Wait for the tone and say the name you recorded earlier, for example “John mobile”.
The name is played back to you and the call is connected.
To make a call with a handsfree
From standby, press the handsfree button, or Bluetooth headset button.
48
This is the Internet version of the user's guide. © Print only for private use.
The magic word
You can record a magic word and use it as a voice command to allow totally handsfree
access to voice dialling. Instead of pressing and holding a volume button to voice dial,
you say the magic word and then one of your recorded voice commands. The magic
word is especially suitable when using a car handsfree kit.
Note:
Choose a long, unusual word or phrase that can easily be distinguished from ordinary
background speech.
To activate and record the magic word
1. } Settings } the General tab } Voice control } Magic word } Activate.
2. Instructions appear. } Continue. Wait for the tone and say the magic word.
3. Instructions appear. } Continue and select the environments in which you want
your magic word to be activated. You can select several alternatives.
Voice answering
You can answer or reject incoming voice and video calls by using your voice, when
using a portable handsfree or a car handsfree kit.
Note:
You cannot use voice answering if you have selected an MP3 file as ringtone.
49
This is the Internet version of the user's guide. © Print only for private use.
To activate voice answering and record voice answer commands
1. } Settings } the General tab } Voice control } Voice answer } Activate.
2. Instructions appear. } Continue. Wait for the tone and say “Answer”, or another
word. If the recording sounds ok } Yes. If not } No and repeat step 2.
3. Say “Busy”, or another word } Yes.
4. Instructions appear. } Continue and select the environments in which you want
voice answering to be activated. You can select several alternatives.
To answer a call using voice commands
When the phone rings, say “Answer” and the call is connected.
To reject a call using voice commands
When the phone rings, say “Busy”.
The call is rejected. The caller is diverted to voicemail, if activated, or hears a busy tone.
Editing your voice commands
You can keep all your voice commands up to date by re-recording them or deleting
the ones you do not use. You can also edit a voice command for a phone number
in the phonebook. Select the contact you want to edit a voice command for } More
} Edit contact. Scroll to the relevant tab and edit your voice command.
To re-record a voice command
1. } Settings } the General tab } Voice control } Voice dialling } Edit names.
2. Select a voice command } More } Replace voice.
3. Wait for the tone and say the command.
50
This is the Internet version of the user's guide. © Print only for private use.
Tips when recording and using voice commands
• If your phone cannot detect speech, one of the following might have happened:
• You spoke too softly – try speaking louder.
• You held the phone too far away – hold it nearer to your mouth.
• The voice command was too short – it should be around one second long and more
than one syllable.
• You spoke too late or too soon – speak immediately after the tone.
• You did not record the voice command when the handsfree was attached – for voice
control with a handsfree kit, record when the handsfree is attached.
• You used another intonation – use the same intonation as you did when recording
the voice command.
51
This is the Internet version of the user's guide. © Print only for private use.
Diverting calls
2.14
If you cannot answer incoming calls, you can divert them to another number, for example,
your answering service.
Note:
When the Restrict calls function is activated, some Divert calls options are not available.
You can choose between the following divert options:
• Divert always – divert all calls.
• When busy – divert calls if you are already on the phone.
• Not reachable – divert calls if your phone is turned off or if you are unreachable.
• No reply – divert calls that you do not answer within a specified time limit
(operator-dependent).
To activate a call divert
1. } Settings } the Calls tab } Divert always.
2. Select a call type and then one of the divert options } Activate.
3. Enter the phone number to which you want your calls to be diverted, or } Look up
to find the contact in your phonebook } OK.
To deactivate a call divert
Scroll to the divert option } Deactivate.
To check all divert options
} Settings } the Calls tab } Divert always } Check all.
52
This is the Internet version of the user's guide. © Print only for private use.
2.15
More than one call
You can handle more than one voice call simultaneously. For example, you can put an
ongoing call on hold, while you make or answer a second call, and then switch between
the two calls.
Call waiting service
If the call waiting service is activated, you hear a beep if you receive a second call during
an ongoing call.
To activate or deactivate the call waiting service
} Settings } the Calls tab } Manage calls } Call waiting.
To make a second call
1. } Hold to put the ongoing call on hold.
2. Enter the number you want to call } Call.
Receiving a second voice call
When you receive a second voice call, you can do the following:
• } Answer to answer the second call and put the ongoing call on hold.
• } Busy to reject the second call and continue the ongoing call.
• } Replace active call to answer the second call and to end the ongoing call.
53
This is the Internet version of the user's guide. © Print only for private use.
Handling two voice calls
Ongoing video call
When you have one ongoing voice call and one voice call on hold, you can do the following:
When you have an ongoing
video call and receive a second
call you have to end the video
call to be able to answer the
second call.
• } Switch to switch between the two calls.
• Press
• Press
} Join calls to join the two calls into a conference call.
} Transfer call, to connect the two calls. You are disconnected from
both calls.
• } End call to end the ongoing call, then press Yes to retrieve the held call.
• } End call twice to end both calls.
• You cannot answer a third call without ending one of the first two calls or joining
them into a conference call.
Conference calls
In a conference call, you can have a joint conversation with up to five other people. You
can also put a conference call on hold and make another call. Conference calling is only
available for voice calls.
Note:
There may be additional charges for calls involving multiple parties, contact Vodafone
Customer Care for more information.
Creating a conference call
To create a conference call, you must first have one ongoing call and one call on hold.
In a conference call you can have a private conversation with one of the participants
or release a participant.
To join the two calls into a conference call
Press
} Join calls.
54
This is the Internet version of the user's guide. © Print only for private use.
To add a new participant
1. } Hold to put the joined calls on hold.
2. Press
3. Press
} Add call and call the next person you want to include in the conference call.
} Join calls.
4. Repeat steps 1-3 to include more participants.
To release a participant
Press
} Release part and select the participant that you want to release from
the conference call.
To have a private conversation
1. Press
} Talk to and select the participant that you want to talk to.
2. } Join calls to resume the conference call.
55
This is the Internet version of the user's guide. © Print only for private use.
More call features
2.16
My numbers
You can view, add and edit your own phone numbers.
To check your phone numbers
} Phonebook } Options } Special numbers } My numbers and select one of the
options.
Notepad
You can use the phone to make a note of a phone number during a call. When you end
the call, the number remains on the screen. } Call to call the number. } More } Save
number and select a contact to save the number. If you want to create a new contact
and save the number } New contact.
Groups
You can create a group of numbers and email addresses. By doing so, you can send
To create a group of numbers and email addresses
1. } Phonebook } Options } Groups } New group } Add.
2. Enter a name for the group } Continue.
3. } New } Add to find the contact in your phonebook.
56
This is the Internet version of the user's guide. © Print only for private use.
4. Select a number or an email address from the contact. If the contact has more than
one item, use and to view the items.
5. Repeat steps 3-4 to add more numbers or email addresses to the group. } Done to
save the group.
Business cards
You can add your own business card to the phonebook. You can exchange business
cards between your phone and another similar phone or a PC, using Bluetooth wireless
technology, the infrared port, cable or a text or picture message.
To add your own business card
} Phonebook } Options } My business card and add information for your business
card } Save.
To send your business card
} Phonebook } Options } My business card } Send my card and select
a transfer method.
To receive a business card
When you receive the business card } Yes to save the business card in the phonebook.
Showing or hiding your number
If your subscription supports the Calling Line Identification Restriction (CLIR) service,
you can hide your phone number when making a call. You select this as a default setting.
57
This is the Internet version of the user's guide. © Print only for private use.
To always show or hide your phone number
1. } Settings } the Calls tab } Show or hide no..
2. Select Show number, Hide number or Network default.
Accept calls
With the accept calls service, you can choose to receive calls only from certain phone
numbers. Other calls are automatically rejected by a busy tone. If the call divert option
When busy is activated, calls are diverted instead of rejected by a busy tone. The phone
numbers of calls you have rejected are saved in the call list.
To add numbers to the accepted callers list
1. } Settings } the Calls tab } Manage calls } Accept calls } Only from list.
2. } New } Add. This takes you to the phonebook. Select contacts from your phonebook.
To add a group to the accepted callers list } Groups (requires that you have created
To accept all calls
} Settings } the Calls tab } Manage calls } Accept calls } All callers.
Restricted dialling
You can use the restrict calls service to restrict outgoing and incoming calls. This may
be useful, for example, when you are abroad. To use this service, you need a password
which you get from your service provider.
Note:
If you divert incoming calls, you cannot activate some restrict calls options.
58
This is the Internet version of the user's guide. © Print only for private use.
The following calls can be restricted:
• All outgoing calls – All outgoing.
• All outgoing international calls – Outgoing intl.
• All outgoing international calls except to your home country – Outgoing intl roam.
• All incoming calls – All incoming.
• All incoming calls when you are abroad (when roaming) – Inc. when roaming.
To activate or deactivate a call restriction
1. } Settings } the Calls tab } Manage calls } Restrict calls and select an option.
2. Select Activate or Deactivate.
3. Enter your password } OK.
Fixed dialling
The fixed dialling function allows calls to be made only to certain numbers. Fixed dialling
requires a SIM card that allows fixed numbers to be saved. The fixed numbers are protected
by your PIN2.
Note:
Calls to the international emergency number 112 can still be made, even when the fixed
dialling function is activated.
When fixed dialling is activated, you cannot use numbers which are stored on
the SIM card.
Partial numbers can be saved. For example, saving 0123456 allows calls to be made
to all numbers starting with 0123456. You may also use the wild card character ?. For
example, saving 01234567?0, allows calls to be made to numbers from 0123456700
to 0123456790.
59
This is the Internet version of the user's guide. © Print only for private use.
To activate or deactivate fixed dialling
1. } Phonebook } Options } Special numbers } Fixed dialling and select
Activate or Deactivate.
2. Enter your PIN2 } OK.
To save a fixed number
} Phonebook } Options } Special numbers } Fixed dialling } Fixed numbers
} New number and enter the information.
Note:
To be able to use packet-switched services (GPRS), for example, browsing the Internet,
when fixed dialling is active, you have to enter the code *99# in the fixed numbers list.
Two voice lines
If you have a subscription that supports alternate line service, your phone may have two
voice lines with different phone numbers.
This may be useful if, for example, you want to keep business calls and private calls
on separate lines. You select which line you want to use for outgoing calls. All outgoing
calls are made on this line until you change it. Incoming calls can still be received on
either line.
You can change the names of the lines, and have different settings for each line,
for example, different ringtones.
To select a line
} Settings } the Calls tab and select line 1 or 2.
60
This is the Internet version of the user's guide. © Print only for private use.
To change the name of a line
} Settings } the Display tab } Edit line names and select one of the lines to edit
the name.
Call time and cost
During a call, the duration of the call is shown on the screen. If you subscribe to cost
information, you can check the duration of your last call, outgoing calls and the total
time. You can also check the cost of your last call and the total cost of your calls.
Note:
If you subscribe to cost information, you must enter your PIN2 to reset the cost or
time counter.
To check the call time
} Settings } the Calls tab } Time & cost } Call timers.
To reset the call time meter
} Settings } the Calls tab } Time & cost } Call timers } More and select
Reset total or Reset outgoing.
To check the call cost
} Settings } the Calls tab } Time & cost } Call costs.
To reset the call cost meter
} Settings } the Calls tab } Time & cost } Call costs } More } Clear total cost.
61
This is the Internet version of the user's guide. © Print only for private use.
Setting the call cost
You can use the tariff function to specify the price per call unit. If you do not specify
a price per call unit, the number of call units appears.
To enter the price per call unit
1. } Settings } the Calls tab } Time & cost } Call costs } More } Set tariff.
2. Enter your PIN2 } OK.
3. } Currency and enter the code for the currency you want, (for example GBP for
Pounds Sterling) } OK.
4. } Units and enter the price per call unit } OK. To enter a decimal point, press
.
Credit limit for calls
You can enter a total amount of money that can be used for making calls. When the
amount reaches zero, no more calls can be made. Please note that the credit limit
is only an estimated value.
To set a credit limit
1. } Settings } the Calls tab } Time & cost } Call costs } More } Set credit
and enter your PIN2 } OK.
2. Select Limited or Unlimited. If you select Limited, enter an amount } OK.
Call priority service
You can request a certain priority when you make a call, if your subscription supports
the call priority service. The priority levels are defined by your network operator and are
normally within the range of 0-4, where 0 is the highest priority.
62
This is the Internet version of the user's guide. © Print only for private use.
To check or change your standard priority level
1. } Settings } the Calls tab } Manage calls } Default priority.
2. The network sends available priority levels. Select a priority level.
To change the priority for one call
1. Enter the phone number you want to call.
2. } More } Call priority and select a priority. The number is called.
Closed user groups
The closed user group function is a way of lowering call costs. If you subscribe to closed
user groups it is cheaper, on some networks, to make calls within a call group. You can
save ten groups.
To add a group
1. } Settings } the Calls tab } Manage calls } Closed groups } Edit list
} New group } Add.
2. Enter the name of the user group } Continue.
3. Enter the index number } Save. You get the index number from your network operator.
To call outside a closed user group
} Settings } the Calls tab } Manage calls } Closed groups } Open calls } On.
When Off is selected, it is only possible to call within the group.
63
This is the Internet version of the user's guide. © Print only for private use.
Tone signals
You can use telephone banking services or control an answering machine by sending
tone signals (also known as DTMF tones or touch tones) during a call.
• To send the tones, press the keys
-
,
or
.
.
• To clear the screen after the call is finished, press
• To turn the tones on or off during a call, press
Turn off tones or Turn on tones.
in standby and select
64
This is the Internet version of the user's guide. © Print only for private use.
Messaging
This chapter gives information about the types of messages
supported in your phone as well as a complete Messaging
glossary.
You will find instructions on how to send, read and manage text
messages (SMS), picture messages (MMS) and email. You will
also learn about Messenger – the instant messaging function
that allows you to join chat sessions and see which of your
contacts that are online.
Details about Area Information (traffic reports etc.) and Cell
Information (important information from your network operator)
exist. Please contact your service provider for more information
about these services.
65
This is the Internet version of the user's guide. © Print only for private use.
Text messages (SMS)
3.1
Text messages are sent via SMS (Short Messaging Service). Text messages can contain
simple pictures, animations, melodies and sound effects. Text messages can be sent
to one person, several recipients or to a group of recipients that you have saved in the
Note:
If you send a text message to a group, you are charged for each member of that group.
Before you start
First make sure that the number of your service centre is set. The number is supplied
by your service provider and is usually saved on the SIM card.
To set the service centre number
1. } Messaging } Settings } SMS } Service centre. If the service centre number is
saved on the SIM card, it is shown in the list.
2. If there is no number in the list } Add and enter the number, including the international
“+” sign and country code } Save.
Sending text messages
Note:
Some language-specific characters use more space. For some languages you
66
This is the Internet version of the user's guide. © Print only for private use.
To write and send a text message
1. } Messaging } Create message } SMS.
2. Write your message } Continue. If you want to save the message for later, press
} Yes to save it in Drafts.
3. } Enter phone no. and enter the recipient’s phone number, or } Phonebook look up
to retrieve a number or a group from the phonebook. To enter an email address
} Enter email address. A list below the send options shows the last 10 recipients.
You can also select a recipient from this list. } Send.
To insert an item in a text message
1. } Messaging } Create message } SMS.
2. While writing your message } More } Add item.
3. Select Picture, Sound effect, Melody, Animation, Templates or Picture (other).
4. Select an item.
Formatting text
You can change the style, size and alignment of the text, and create new paragraphs.
Note:
Text formatting only applies when Latin characters are used.
To format the text in a text message
1. } Messaging } Create message } SMS.
2. While writing your message } More } Text format. Then select Text size,
Text style, Alignment or New paragraph.
3. Select a text format.
67
This is the Internet version of the user's guide. © Print only for private use.
Receiving text messages
When you receive a text message, a message alert sounds.
} Yes to read the text message or } No if you want to read the message later.
While reading the text message you can, for example, go to a Web address found in
the text message, save a picture found in the text message or listen to a sound inserted
in the text message.
When you have read the text message } More to view a list of options. Press
to close
the text message.
Calling a number in a text message
You can call a phone number that appears in a text message.
To call a number in a text message
Select the phone number } Call.
Saving and deleting text messages
Text messages are saved in the phone memory. When the phone memory is full, you must
delete messages or move them to the SIM card to be able to receive new messages.
Messages that you have saved on the SIM card remain there until you delete them.
To save a message to the SIM card
} Messaging } Inbox } More } Save message } Saved messages.
68
This is the Internet version of the user's guide. © Print only for private use.
To save an item from a text message
1. Select the phone number, Web address, picture or sound that you want to save
in the message } More.
2. If you have selected to save a phone number } Use } Save number. If you have
selected a Web address } Save bookmark, a picture } Save picture, a sound
} Save sound.
To save or delete several messages
1. } Messaging and select a folder.
2. Select a message } More } Mark several.
3. Scroll and select more messages by pressing Mark or Unmark.
4. Press More } Save messages or press More } Delete messages.
To delete a message
} Messaging } Inbox } More } Delete.
To delete all messages
} Messaging } Inbox } More } Delete all msgs.
Long messages
Long messages
The number of characters that a text message can contain depends on the language
you are writing in. You can send a longer message by linking two or more messages.
Please note that you are charged for each of the messages linked in a long message.
You may not receive all parts of a long message at the same time.
Check with Vodafone Customer
Care for the maximum number
of messages that can be linked.
To turn long messages on
}
Messaging
}
Settings
}
SMS
}
Max. msg length
}
Edit
}
Max. available.
69
This is the Internet version of the user's guide. © Print only for private use.
Templates
If you have one or more messages that you send often, you can save these as templates.
Your phone has predefined templates, but you can also create your own.
To create a template
1. } Messaging } Templates } New template } Add } Text.
2. Write the message } OK.
3. Enter a title for the message } OK.
Message options
You can set a default value for several message options or choose the settings each time
you send a message. You can, for example, request a delivery report, select what type
of text message you want to send or set how long a message should be valid. For details
To set a default text message option
} Messaging } Settings } SMS and select an option.
To set a message option for a specific message
1. When you have selected a recipient to send your text message to } More } Advanced.
2. Select the option that you want to change } Edit and select a new setting.
3. } Done when you have changed the options.
To check the delivery status of a sent message
} Messaging } Sent messages and select a text message } View } More
} View status.
70
This is the Internet version of the user's guide. © Print only for private use.
3.2
Picture messages (MMS)
Picture messages can contain text, pictures, video clips, camera pictures, melodies and
sound recordings and are sent via MMS (Multimedia Messaging Service). You must have
a subscription that supports MMS, and the receiver of the picture message must also have
support for MMS. Picture messages can be sent to a mobile phone or an email account.
Before you start
Before sending a picture message, make sure that:
1. The address to your message server is set } Messaging } Settings } MMS
} Message server.
2. You have entered the correct settings } Messaging } Settings } MMS
} Internet profile. Select a profile or New profile. If you do not have the required
settings, please contact Vodafone Customer Care.
Writing and sending picture messages
When composing a picture message, you select from different items to format your
message. The different items are: Camera (take a picture or record a video clip), Picture
(choose from existing pictures), Text, Sound, Video (choose from existing video clips)
and Sound recording (record a sound).
Sending your business card
You can send your business
card as an attachment in a
picture message.
Before sending a picture message, you can select from different options to adjust and
enhance your message. You can, for example, preview the entire message or a single
page in the message, add a background colour or change the timing for the message.
71
This is the Internet version of the user's guide. © Print only for private use.
You can also enhance individual items in the message, for example, adjust item timing,
To write and send a picture message
1. } Messaging } Create message } MMS. } Add to view a list of items to add to
your message. Select an item.
View the size of the message
2. } Add to add more items to the message.
The size of the message
is displayed in the top right
corner of the screen.
3. } More to view and select options to enhance the message.
4. To enhance individual items in the message, highlight an item and press the left
selection key.
5. When you have finished writing your message } More } Send.
6. } Enter phone no. and enter the recipient’s phone number, or } Phonebook look up
to retrieve a number or a group from the phonebook. To enter an email address
} Enter email address. A list below the send options shows the last 10 recipients.
You can also select a recipient from this list.
7. If needed } More to select additional send options. You can select Add recipient
or Recipients to add more recipients, Edit subject to change the subject, Advanced
to select a send option which is specific for this message or Add attachment.
8. } Send.
To make a call while writing a picture message
1. While writing your message } More } Make a call.
2. Enter or retrieve a phone number } Call. You return to the message.
3. To end the call } More } End call.
72
This is the Internet version of the user's guide. © Print only for private use.
Default message options
You can, for example, request read reports or delivery reports and set a validity period
for picture messages. These settings are valid for all picture messages that you send.
To set a default message option
} Messaging } Settings } MMS and select one of the options.
Receiving picture messages
When you receive a picture message, a message alert sounds.
} Yes to read or play the message. Press Stop to stop the message. When you have
read the message } Reply to reply immediately or } More to view a list of options.
Press
to close the message.
Save items from a picture message
When you have viewed a picture message } More } Save items and select an item
from the list that appears } Save.
Delete a message
Delete picture messages
You can select a message from
the list of messages and press
to delete the entire
Picture messages are saved in the phone memory. When the phone memory is full,
you must delete messages to be able to receive new messages.
message.
To delete a message
1. } Messaging and select a folder.
2. Select the message } More } Delete.
73
This is the Internet version of the user's guide. © Print only for private use.
To delete several messages
Saving several messages
1. } Messaging and select a folder.
When you want to save several
messages at a time you can
use Mark several. See the
Save messages in step 4.
2. Select a message } More } Mark several.
3. Scroll and select more messages by pressing Mark or Unmark.
4. } More } Delete messages.
To delete all messages
} Messaging and select a folder } More } Delete all msgs.
Templates
You can base your message on one of the predefined templates. You can also add new
templates.
To use a predefined template for a picture message
1. } Messaging } Templates and select a template } Use.
2. } Add to make changes or add new items.
3. } More } Send to send the message.
To create a new template for a picture message
1. } Messaging } Templates } New template } Add } MMS } Select.
2. } Add to add new items.
3. } More } Save template } Select to save the template.
4. You can now edit the title of the template. Then confirm by pressing OK.
74
This is the Internet version of the user's guide. © Print only for private use.
Signatures
You can create a signature to add to your picture messages. Signatures can cover one
page and contain the same items as a picture message, as well as Web links and phone
numbers. The recipient can highlight a Web address or a phone number in the signature
and browse to the address or call the number.
To create a signature
1. } Messaging } Settings } MMS } Signature } Add new signature } Add.
2. } Add to view a list of items to add to your signature. Select an item.
3. } Add to add more items to the signature.
4. } More } Save signature to save the signature.
Note:
The signature adds to the total size of the picture message.
To turn on or off the signature
} Messaging } Settings } MMS } Signature } My signature to include
a signature in all new picture messages you write, or No signature not to include
a signature. If you have selected No signature, you can still add a signature each
time you want to use it by adding it when you write the message.
To add a signature to a picture message
If you have selected not to include a signature as default, you can add a signature while
writing your message, } Add } Signature.
75
This is the Internet version of the user's guide. © Print only for private use.
Automatic download
You can select how you want your picture messages to be downloaded.
Downloading messages
} Messaging } Settings } MMS } Auto download to view the following:
• Always – your phone automatically downloads messages to your phone as soon
as they come to your network operator’s server. This is default.
• Ask in roaming – you will be asked if you want to download messages when
you are using a network other than your network operator’s.
• Never in roam. – the messages are never downloaded when you are using
a network other than your network operator’s.
You can always download
previously not downloaded
messages in the Inbox by
highlighting the message
} View.
• Always ask – you will always be asked if you want to download messages,
regardless of the network used.
• Off – new messages appear in the inbox as icons. Select the message } View
} Yes to download.
76
This is the Internet version of the user's guide. © Print only for private use.
3.3
Postcard
As part of Vodafone live! you can have a message with picture and text delivered
as a postcard to a street address.
To send a postcard
More ways of sending
postcards
1. } Messaging } Create message } Postcard.
2. Select Picture to add a picture to your postcard, or Camera picture if you want
to take a picture to include in the postcard.
Another way of sending
a postcard is to use the
phonebook by selecting
a contact, More } Send
message } Postcard.
3. Write a message to accompany the picture } OK.
4. } Send } Address: to enter name and address, or you can either select
Phonebook look up to retrieve a contact, or select a recipient from the list of
previous recipients.
You can also create a postcard
by selecting My items
} Pictures. Select a picture
} More } Send } As
Postcard.
5. When you have entered name and address } OK } Send. The picture and message
will be printed on a postcard and sent to the address that you select.
To view a sent postcard
} Messaging } Sent messages and highlight the message } View.
Note:
This service is not available in all countries.
77
This is the Internet version of the user's guide. © Print only for private use.
Email
3.4
You can use your phone to send and receive email messages. Please note that you
need a subscription that supports data transmission. For more information, contact
Vodafone Customer Services.
The necessary settings for Vodafone Mail have been pre-configured in your phone.
However, you must configure your personal Vodafone Mail user name and password.
To configure username and password
1. } Messaging } Email } Settings.
2. Highlight the account } More } Edit account.
3. Enter username and password } Save.
Writing and sending email messages
When writing and sending your email message, you can select from several options
} Messaging } Email } Inbox } Send&rec } (when the inbox is empty) or
} Messaging } Email } Inbox } More } Send & receive offers the fastest way
to send, or check for, new email messages.
78
This is the Internet version of the user's guide. © Print only for private use.
Note:
The number of email messages that can be saved depends on how much memory
is left in the phone. All email messages are also saved on your email server, and you
can view both older and newer messages on the server.
To write and send an email message
1. } Messaging } Email } Create message.
2. Write the subject for your message } Continue and then the text } Continue.
3. Enter email address to enter an email address or Phonebook look up to retrieve
an address from your phonebook. You can also select an address from the list of
previous recipients (if any).
4. Send to send your email message or More to view a list of options for your message.
You can, for example, add an attachment containing a picture, video clip, sound
or your business card.
To receive and read email messages
1. } Messaging } Email } Inbox } Send&rec (when inbox is empty) or } Messaging
} Email } Inbox } More } Send & receive to download new messages.
2. Go to the Inbox and select a message to read it.
To reply to an email message
1. Open the email message } Reply.
2. Write your message. } More to view options for the message.
3. } Send to send the message.
79
This is the Internet version of the user's guide. © Print only for private use.
To save an email address or a phone number in an email message
1. Select the email address or phone number that you want to save } More.
2. If you have selected to save an email address } Save email. If you have selected
to save a phone number } Use } Save number.
To save an email message
1. Open the email message } More } Save message.
2. The message is saved in Saved email in the Email menu.
To save several email messages
1. } Messaging } Email.
2. Select a message } More } Mark several.
3. Scroll and select more messages by pressing Mark or Unmark.
4. } More } Save messages.
To delete an email message (POP3 users)
1. } Messaging } Email } Inbox and select the message } More.
2. Select Mark for deletion. The message is deleted the next time you connect to your
email server. If you want to delete several messages } Mark several. Scroll and
select more messages by pressing Mark or Unmark. } More } Mark for deletion.
To delete an email message (IMAP4 users)
1. } Messaging } Email } Inbox and select the message } More.
2. } Mark for deletion. The message is marked for deletion on the server. If you want
to delete several messages } Mark several. Scroll and select more messages
by pressing Mark or Unmark. } More } Mark for deletion.
3. } More } Clear inbox. and press With send & rec. or No send & rec. to delete
messages.
80
This is the Internet version of the user's guide. © Print only for private use.
3.5
Messenger
The Messenger function gives you more options when messaging. You can create a list
of favourite contacts, either from the phonebook or from the Messenger server. If your
subscription supports instant messaging services, you can see which of your contacts
are online and what mood they are in. To see contacts online, they have to be connected
to the Messenger server. You can also send and receive instant messages and join
community chats. The settings for Vodafone Messenger have been pre-configured
in your phone.
Note:
Visit www.vodafone.com for details. This service is not available in all countries.
Log in to the Messenger server
You can select to log in to your Messenger server each time you want to send or receive
instant messages, or you can be logged in automatically when you turn on your phone.
You can edit the settings for your Messenger account. To set automatic log in and edit
your account settings you have to be logged out from the Messenger server.
To log in to your Messenger server
} Messaging } Messenger } Myself } Log in.
To set automatic log in
1. } Messaging } Messenger } Myself } More } Accounts. If you have more
than one account, select account.
2. } Auto-login: } On, or or if you have more than one account, } Edit, select account
} Auto-login: } On.
81
This is the Internet version of the user's guide. © Print only for private use.
To edit the Messenger account
1. } Messaging } Messenger } Myself } More } Accounts and select an account.
2. Edit your settings. If you have more than one account } Edit, select account and edit
your settings.
Roaming networks
You can select if you want to continue to be logged in to Messenger when you leave
your home network (roaming), that is, when your home network is not within range.
To allow connection in roaming networks
1. } Messaging } Messenger } Myself } More } Accounts , if you have more
than one account, select an account.
Using Messenger with your
favourite contacts
2. } Allow connection or if you have more than one account } Edit, select account
} Allow connection.
If you add your favourite contacts
from your phonebook to
3. Select Home network if you want to be disconnected from Messenger when you
leave your home network. Select Anywhere if you want to be logged in independently
of network.
Messenger, you can quickly
access them and choose how
you want to communicate with
them. In Messenger, just
highlight a contact and press
Call, or } More to send a
message of your choice.
Adding contacts
You can create a list of contacts even if you do not have a Messenger account and are
not connected to the Messenger server.
To add a contact from the phonebook
1. } Messaging } Messenger } More } Add contact } From Contacts.
2. Enter the first letters of the contact and then select a contact.
3. When you have selected a contact, you can choose to subscribe to status information
for that contact (if you have a Messenger account). To subscribe } Yes and follow
the instructions that appear. } No if you do not want to subscribe.
82
This is the Internet version of the user's guide. © Print only for private use.
To add a contact from a network server
} Messaging } Messenger } More } Add contact } From server and follow the
instructions that appear.
To search for a contact
1. } Messaging } Messenger } More } Add contact } From server } No.
2. Enter your search criteria in one or several of the fields } Search.
3. When you have found the contact you want to save } Add.
4. Follow the instructions that appear.
Contact list
You can create nicknames for the contacts in your list that are connected to the
Messenger server. You can also link a contact to the phonebook, and get access
to information saved in the phonebook.
To enter a nickname
1. } Messaging } Messenger, and select a contact.
2. } More } Manage contact } Edit nickname.
3. Enter the nickname for that contact } Save.
To link a contact to the phonebook
1. } Messaging } Messenger and select a contact.
2. } More } Manage contact } Link to Contacts and select the contact
in phonebook that you want to create a link to.
83
This is the Internet version of the user's guide. © Print only for private use.
To send a message from Messenger
1. } Messaging } Messenger and select a contact.
2. } More } Send instant msg, write the message, select Send if the contact is linked
to your phonebook, or Send IM, write the message } Send if the contact is not linked.
Status
You can view the status of your contacts and choose to show your own status to others.
To change your own status, you have the following options:
• Picture – select a picture from Pictures or take a picture with the camera.
• About me – write a short text about yourself.
• Availability – select Available, Busy, Away, or Invisible. If you select Invisible,
you will appear as offline to others.
• Mood – select a mood from the list.
• Show my status – } To all if you want to show full status to friends but limited
status to others, and } Only to contacts if you want to show full status to friends
but nothing to others.
• Username: – view your username.
• Alias: – add a nickname for yourself.
To view the status of a contact
} Messaging } Messenger and select a contact } More } View status. If you want
to update the picture of the contact, you have to do this manually by selecting More
} Update picture.
To change your own status
} Messaging } Messenger } Myself } Change status (if logged in), or } More
} Change status (if not logged in) and edit your status according to the options. Press
Save to save your status.
84
This is the Internet version of the user's guide. © Print only for private use.
Receiving a message
When you receive a message, a message alert sounds and an icon appears in the
status bar.
Strangers
A stranger is someone that is not in your list of contacts. An icon indicates a message
from a stranger. You can add the stranger to your list of contacts, or you can block the
stranger, or you can send the stranger an instant message. If you do not add the stranger
to your list of contacts, the stranger disappears when you log out from the Messenger
server.
To add a stranger to the list of contacts
} Messaging } Messenger and select the stranger } More } Add as contact.
Blocking contacts and strangers
You can block a contact or stranger so that they cannot view your status or send you
instant messages.
To block or unblock a contact
1. } Messaging } Messenger and select a contact.
2. } More } Manage contact. Select Block contact or Unblock contact.
To view a list of blocked contacts } More } View block list.
To block a stranger
} Messaging } Messenger and select the stranger } More } Block user.
85
This is the Internet version of the user's guide. © Print only for private use.
Chatroom
A chatroom can be started by your service provider, by an individual Messenger user
or by yourself. You can save chatrooms either by saving a chatroom address, adding the
address and name manually or by searching for a specific chatroom.
To receive a chat invitation
1. When a message alert sounds and the message New chat invitation received
is displayed, select View to view the invitation or Discard to discard the invitation.
2. If you have selected to view the invitation, and want to join the chat } Join chat.
The chat invitation is saved automatically. If you want to save the chat invitation
without joining the chat } More } Save chatroom. If you want to discard the
invitation now } More } Discard invitation.
To search for a chatroom
1. } Messaging } Messenger } More } Add chatroom } No.
2. Enter your search criteria in one or several of the fields } Search.
3. When you have found the chatroom you want to save } Add.
To join a chatroom
} Messaging } Messenger and select a chatroom } Join chat.
To start a chatroom
1. } Messaging } Messenger } More } Start chatroom.
2. Select contacts to invite to the chatroom from your list of contacts } Continue.
3. Enter a short invitation text to the chatroom } Continue } Send.
86
This is the Internet version of the user's guide. © Print only for private use.
Online contact alert
You can choose to be notified when a contact comes online. The notification is indicated
by an icon. When you log off, or when the contact has come online, the notification is
cleared.
To set an online contact alert
} Messaging } Messenger and select a contact More } Manage contact
} Alert me.
87
This is the Internet version of the user's guide. © Print only for private use.
Area and cell information
3.6
Area information
Area information is a type of text message (for example, a local traffic report) that is sent
to all subscribers within a certain network area. When you receive an area information
message, the message automatically appears on the screen. Press Save to save the
message in your inbox, or Discard to delete the message.
Area information
Please consult your service
provider for more information
about area information.
To turn area information on or off
} Messaging } Settings } Area info } Reception.
Cell information
The cell information channel is used by some network operators to send messages
about a certain network area to their subscribers within that area.
To turn on the cell information channel
} Messaging } Settings } Area info } Cell information.
88
This is the Internet version of the user's guide. © Print only for private use.
3.7
Messages glossary
Options and settings for text, picture and email messages are listed below:
• Accept messages – select which messages you want to accept and download.
• Add attachment – add, for example, pictures, sounds, themes, video clips,
business cards or recordings to a message.
• Auto download – select how you want your picture messages to be downloaded
• Check interval – select how often you want the phone to connect to your email
server and check for incoming email messages.
• Connect using – select which data account to use when connecting to a specific
email account.
• Content alert – give a warning when messages are larger than 30Kb.
• Copy outgoing – select if you want email messages sent from your phone also to
be sent to an email address of your choice. This way, your sent messages are copied
and can be saved for future reference.
• Creation mode – select settings for content in picture messages. The recipient may
not be able to view some content.
• Delivery report – request a status report to check if a message has been delivered.
• Download – select whether to receive headers and text or headers only in email
messages.
• Incoming port – if needed, change the number of the port used by the protocol you
are using.
• Incoming server – enter the name or IP address of the service provider for incoming
email messages. For example, mail.server.com or 10.1.1.1.
• Internet profile – select Internet settings specific for picture messaging.
• Mailbox – enter a username for your email account.
• Message server – enter the message server or service centre address for picture
messages.
89
This is the Internet version of the user's guide. © Print only for private use.
• Outgoing port – if needed, change the number of the port used by the SMTP protocol.
• Outgoing server – enter the name or IP address of the SMTP server to be able
to send email messages.
• Page timing – set the duration in seconds that the page will be shown on the
recipient’s display.
• Password – enter a password for your email account. Your service provider may
alternatively request a password on connection.
• Picture – add a picture, or replace with an alternative, from the Pictures folder.
• Priority – set the message priority, select High, Normal or Low.
• Preview – view the entire picture message before sending it.
• Preview page – view a specific page in the picture message, without having to play
the entire message.
• Protocol – select POP3 or IMAP4.
• Read report – request confirmation that the message has been read.
• Request reply – include a reply request if you want the recipient of your message
to reply.
• Save in Drafts – save the email message in the Drafts folder.
• Save in Outbox – save the email message in the Outbox folder.
• Set priority – set the message priority, select High, Normal or Low.
• Signature – select if you want to add your business card to your email messages.
• SMS type – the phone supports different types of messages. Your service provider
may offer the facility of converting a text message into a format (email or fax, for example)
that suits the equipment that is going to receive the message.
• Sound – add a sound, or replace with an alternative, from the Sounds folder.
• Subject: – write a title for your message.
• Timing – set how many seconds you want an item in a message to be displayed.
• Validity period – if your message cannot be delivered, for example, if the recipient
has turned off the phone, your service centre can save the message to send it later.
• Video – add a video clip, or replace with an alternative, from the Videos folder.
90
This is the Internet version of the user's guide. © Print only for private use.
Pictures and sounds
Here you can see how to take photos and record video clips.
These can be sent as messages or uploaded to a personal
album on Vodafone live! With the Postcard function, you can
learn how to send photos as a traditional postcard.
You can also see how to compose your own melodies using
MusicDJ™ and record sounds with the sound recorder.
91
This is the Internet version of the user's guide. © Print only for private use.
Introduction to camera and video recorder
4.1
Your phone has a digital Motion Eye™ camera which also works as a video recorder.
The camera lens can be rotated to point inwards towards you, or outwards, away from you.
You turn on the camera by pressing and holding
easily switch between the camera and the video recorder by pressing
on the side of the camera. You can
or
.
You can take pictures, record video clips, save and view them and send them as email
attachments or in picture messages via MMS (Multimedia Messaging Service). To do this,
you need a subscription that supports these services. Please check with Vodafone
Customer Care.
You can also use a picture as a screen saver or as wallpaper, or save it together with
a contact in your phonebook so that the picture appears when that person calls
Before you start
The phone that you are sending the picture or video clip to needs to support data transmission
and picture messaging in order to receive and show the picture or video clip.
Before you send a picture or video clip using picture messaging make sure that:
• You have set the address to your message server for picture messaging and that
Before you send a picture or video clip using email make sure that:
• You have entered settings for a data account and for an email account in your phone,
92
This is the Internet version of the user's guide. © Print only for private use.
Light
Your phone has a light which is placed around the lens. To take pictures or record video
clips in a dimly lit environment, press
to turn on the camera light. To turn off the
camera light, press again. If you do not turn the light off, it will be deactivated after
a while, in order to save battery.
Warning!
Do not look directly at the camera light diods of the phone using a magnification device.
Failure to comply with this warning may damage your eyes.
93
This is the Internet version of the user's guide. © Print only for private use.
Taking pictures and recording videos
4.2
When the phone is opened you can use the camera to take pictures or to record video clips.
To take pictures and record video clips with the phone open
Press and hold
to activate the camera.
• Press
to switch to camera if video recorder is activated. } Capture to take
a picture. When the lens is turned outwards the picture is automatically adjusted
to the correct orientation: heads up, feet down. In the top right corner of the screen,
a counter shows the number of pictures you can still save. The smaller the picture
size, the more pictures you can save. To delete a picture you have taken, press
.
To save the picture and return to the viewfinder, press
. Camera pictures are
saved in My items } Pictures } Camera pictures.
• Press
to switch to video recorder if the camera is activated. } Record to start
the recording. You record video clips with the phone held in a vertical position.
} Pause if you want to pause during the recording. To delete a video clip you have
recorded, press
. To save the video clip and return to the viewfinder, press
.
Camera video clips are saved in My items } Videos } Camera video clips.
To use the zoom
Press to zoom in on the subject. Press
To adjust brightness
to zoom out.
Use the volume buttons on the side of the phone to increase or decrease brightness.
Taking pictures with the phone closed
You can take pictures in two ways: either with the phone closed, or open. With the
phone closed, the external display works as a viewfinder.
94
This is the Internet version of the user's guide. © Print only for private use.
Note:
Auto camera off
You cannot change any settings when taking pictures with the phone closed, except for
the adjusting of brightness.
The camera (when used with
the phone closed) is
To take pictures with the phone closed
deactivated 15 seconds after
you last press a button.
1. Press and hold the camera button to activate the camera.
2. Press the camera button to take a picture. The picture is displayed and saved in My items
3. Press the camera button again to return to the viewfinder mode.
.
Note:
If you open the phone while using the camera, the viewfinder automatically switches
to the screen (the main display).
To take a self-portrait
1. Hold the phone as shown in the illustration, i e with the viewfinder turned towards you.
2. Press and hold the camera button on the side of the phone to activate the camera.
3. Make sure that you have selected the camera, and not the video recorder. (Press
to switch to the camera if the video recorder is activated.) Press the camera button
again to take the picture.
Camera options
When the camera is activated press More to view more options.
Note:
All phones that support pictures can receive the picture size 160x120. Some phones
that support pictures cannot receive the picture sizes 640x480 and 1280x1024. The
best picture size to view on a PC is 1280x1024.
95
This is the Internet version of the user's guide. © Print only for private use.
Options before you take a picture:
• View all pictures – view all your pictures.
• Panorama – you can create a panorama picture by taking a series of three pictures
that are merged into one picture. For best result, make sure that the pictures you
take overlap.
• Picture size – choose between 160x120, 640x480 and 1280x1024 pixels.
• Night mode – enhance picture quality with longer exposure time.
• Effects – select different effects for your picture.
• Frames – add a frame to your picture.
• Picture quality – select quality for your picture. The higher the quality, the more
memory capacity is required.
• Self-timer – the picture is taken a few seconds later.
• Save to – select where to save pictures taken with the camera.
• Reset file no. – reset the numbering of the pictures taken with the camera,
which are saved on the Memory Stick Duo.
Video options
When the video recorder is activated press More to view more options.
• View all clips – view all your video clips.
• Video size – choose between 176x144 and 128x96 pixels.
• Night mode – enhance video clip quality with longer exposure time.
• Effects – select different effects for your video clip.
• Recording time – set the length for your video clip. If you select For picture
msg the video clip fits in a picture message.
• Save to – select where to save video clips recorded with the video recorder.
96
This is the Internet version of the user's guide. © Print only for private use.
Saving pictures and video clips
When you have taken a picture or recorded a video clip, the phone automatically saves it.
Pictures that you take are saved in the Camera pictures subfolder, and clips you record
are saved in the Camera video clips subfolder. If Memory Stick full is displayed, you
cannot save any more pictures or video clips on the Memory Stick Duo until you have
Sending pictures and video clips
When you have taken a picture or recorded a video clip, you can send them instantly
in a picture message. To exchange pictures and video clips using other transfer methods
To take and send a picture
1. Press and hold the camera button to activate the camera. Press
to the camera if the video recorder is activated.
to switch
2. Take a picture by pressing Capture.
3. } Send and create your picture message.
To record and send video clips
1. Press and hold the camera button to activate the camera. Press
to the video recorder if the camera is activated.
to switch
2. } Record to start the video recording. } Stop to end the recording.
3. When you have finished the recording, select Play to view the video clip or Send
and create your picture message to send the video clip. If you want to delete the
recording, press
.
Postcard
As part of Vodafone live! you can have a message with picture and text delivered
as a postcard to a street address.
97
This is the Internet version of the user's guide. © Print only for private use.
To send a postcard
1. Take the picture by pressing Capture.
2. } Send } As Postcard.
3. } Add } Text to add a message to accompany the picture.
4. Write your message } OK.
5. } Send } Address: to enter name and address, or you can either select
Phonebook look up to retrieve a contact, or select a recipient from the list of
previous recipients.
More ways of sending
postcards
6. When you have entered name and address } OK } Send. The picture and message
will be printed on a postcard and sent to the address that you select.
You can also create a postcard
by selecting My items
} Pictures. Select a picture
} More } Send } As
Postcard.
Note:
This service is not available in all countries.
live! Studio
With Vodafone live!, you can save pictures in a Web-based album. This is useful if you
are running out of phone memory, or if you wish to share your pictures with friends
in a virtual album that they (and you) can access on the Web. You can upload a picture
in the following ways:
To upload a picture
• } My items } Pictures, select a picture, More } Send } live! Studio.
• From the camera, Capture } Send } live! Studio.
• You can also upload a message by selecting a folder in Messaging, highlight
a message, More } live! Studio.
Note:
Visit www.vodafone.com for details. This service is not available in all countries.
98
This is the Internet version of the user's guide. © Print only for private use.
4.3
Pictures
Your phone comes with a number of pictures. You can delete the pictures that come with
your phone if you, for example, want to free memory. All pictures are saved in My items
} Pictures. You can:
• Have a picture as wallpaper and as screen saver.
•
Exchange pictures using Bluetooth wireless technology, the infrared port, cable, picture
messages or email.
Animations
You can save animations in your phone. Animations are handled like pictures.
Handling pictures
You can add, edit, or delete pictures in My items. The number of pictures that you can
save depends on the size of the pictures. File types supported are GIF, JPEG, WBMP, PNG
and BMP.
To view your pictures
1. } My items } Pictures.
2. The pictures are shown in thumbnail view. To get a full view } View.
99
This is the Internet version of the user's guide. © Print only for private use.
To display pictures in a slide show
You can view your pictures automatically using the slide show function.
} My items } Pictures and scroll to a picture. } View } More } Slide show.
} To pause } Pause. To resume } Resume. To stop } Exit.
To view information about a picture or a video clip
To display information about a picture or video clip, } My items } Pictures } More
} Information.
To download a picture
1. } My items } Pictures } Go to.
2. Follow the instructions on the screen.
Editing pictures
When editing pictures, press
,
,
or
, or use the keys as follows:
Key
Function
Key
Function
activate tool
select tool
left
left up
left down
right
select colour
exit the picture editor
100
This is the Internet version of the user's guide. © Print only for private use.
Key
Function
Key
Function
undo
up
right up
right down
down
To edit and save a picture
1. } My items } Pictures and scroll to the picture you want } View } More } Edit.
You can now start to edit the picture. To edit pictures taken with the camera, you must
select 160 x 120 or 320 x 240 as picture size.
2. } More } Save picture to save the picture.
Exchanging pictures
You can exchange pictures using Bluetooth wireless technology, the infrared port, cable,
picture messages or email. Please note that you are not allowed to exchange copyright-
To send a picture
1. } My items } Pictures and scroll to the picture you want } More } Send.
2. Select a transfer method.
101
This is the Internet version of the user's guide. © Print only for private use.
To receive and save a picture
1. Open the message you received the picture in, or turn on Bluetooth or the infrared
port if these transfer methods are being used to send the picture.
2. If you received the picture in a message } More } Save picture. If you received
the picture via Bluetooth or the infrared port, follow the instructions that appear on
the screen.
Remote screen
You can view your pictures on a remote screen, for example, a TV, when using a compatible
Bluetooth adaptor. The adaptor is an accessory, and not included in the box. Please refer
to the adaptor user guide for information on how to connect your phone and the remote
screen. You can then use the phone to control the screen. Use the slide show function
to show several pictures in succession.
To connect to a remote screen
1. } My items } Pictures and scroll to the picture you want } View } More
} Remote screen.
2. The phone searches for other Bluetooth devices and a list of available devices is displayed
.
Select the device you want to use. For more information about connecting using
102
This is the Internet version of the user's guide. © Print only for private use.
Screen saver and wallpaper
The phone has a screen saver, which is activated automatically when the phone has been
in idle mode for a few seconds. After a few more seconds, the screen saver changes
to sleep mode, to save power. Press any key on the keypad and the screen turns on again.
If you have a picture as wallpaper, this picture is shown in standby mode. You can select
wallpaper both for the screen, and for the external display.
To use a picture as screen saver
Setting screen savers and
1. } Settings } the Display tab } Screen saver } Pictures.
2. Select the picture you want to use as screen saver.
wallpapers from My items
} My items } Pictures,
highlight a picture } More
} Use } As screen saver,
Extern. wallpaper or Main
wallpaper.
You can also use some Java applications as screen savers. You must close these kinds
of screen savers from within the Java application.
To use a Java application as screen saver
My items } Applications or Games, highlight a Java application } More
} As screen saver
To set a picture as wallpaper for the screen
} Settings } the Display tab } Main wallpaper } Pictures and select the picture
you want to use as wallpaper.
To set a picture as wallpaper for the external display
} Settings } the Display tab } External wallpaper } Pictures and select the
picture you want to use as wallpaper.
103
This is the Internet version of the user's guide. © Print only for private use.
Composing melodies
4.4
You can compose and edit melodies to use as ringtones using MusicDJ™. A melody consists
of four tracks – Drums, Basses, Chords and Accents. A track contains a number of music
blocks. The blocks consist of pre-arranged sounds with different characteristics. The blocks
are grouped into Intro, Verse, Chorus and Break. You compose a melody by adding
music blocks to the tracks.
To compose a melody
1. } Organizer } MusicDJ™.
2. Choose to Insert, Copy and Paste blocks to compose your melody. Use
,
,
or to move between the blocks. Press to delete a block. } More to view
more options.
To edit a previously created melody
} My items } Sounds and select the melody } More } Edit.
Sending and receiving
You can send and receive melodies in several ways, for example using Bluetooth wireless
technology, the infrared port, email or text or picture messages.
Note:
You cannot send a polyphonic melody or an MP3 file in a text message.
104
This is the Internet version of the user's guide. © Print only for private use.
To send a melody
1. } My items } Sounds and select a melody.
2. } More } Send and select a transfer method.
To receive a melody
1. Open the message you received the melody in, or turn on Bluetooth or the infrared
port if these transfer methods are being used to send the melody.
2. When you receive the melody, follow the instructions that appear on the screen.
105
This is the Internet version of the user's guide. © Print only for private use.
Sound recorder
4.5
With the sound recorder, you can record either your own memos or calls. Recorded sounds
can also be set as ringtones. All participants in a call are automatically recorded. When
recording a call conversation, the recording is stopped if any participant ends the call,
and when recording a sound, the recording stops automatically if you receive a call.
Recordings are automatically saved on the Memory Stick Duo if it is inserted, or in the
phone, and can be accessed even if you change your SIM card.
Note:
In some countries or states it is required by law that you inform the other person before
recording the call.
To start a sound recording
1. } Organizer } Record sound.
2. Wait until you hear a tone. When the recording starts, Recording is displayed together
with the time of the current recording (increasing).
To end and play a sound recording
} Save to end the recording, and } Play to listen to the recording.
To view recording options
} More to view the following options:
Record new, Send, Rename, Delete, Recorded sounds.
106
This is the Internet version of the user's guide. © Print only for private use.
The recording stops automatically if you receive a call, or when the call ends. You hear
a tone a few seconds before the memory is full.
To listen to your recordings
1. } My items } Sounds and select the recording you want to hear.
2. } Play to listen to the recording. Press
and
to go to the previous or the next
recording. Press and hold
or
to rewind or fast forward.
3. } Stop to stop playback.
107
This is the Internet version of the user's guide. © Print only for private use.
108
This is the Internet version of the user's guide. © Print only for private use.
Vodafone live! and Internet
Vodafone live! offers pictures, video clips, ringtones and games
all of which can be easily downloaded with the Internet browser.
Use the media player to stream video and sound to your phone,
and play and organize your video and sound files.
109
This is the Internet version of the user's guide. © Print only for private use.
Vodafone live!
5.1
Vodafone live! is your mobile Internet portal – full of information downloads, games, music
and services. It is easy to use, and because the GPRS or even faster 3G connection can
be “always on” there is no wait for dialling up. You pay only for data you send or receive,
not for how long you are connected.
Browsing
Connect to Vodafone live!
Simply use the navigation key
to highlight the item you want
Press the
Vodafone live! key (in standby) to connect to the Vodafone live! main menu.
To exit, press and hold
.
to select, then press
open that page.
to
You can also go to the Vodafone live! offline Web page – Favourites. This menu is offline,
so you will not be connected until you choose a link. The following describes some
of the services you can choose:
Press
to go back a page.
} More to view more browsing
options.
Vodafone live! services
• More sounds – download sounds and ringtones
• More pictures – download pictures, animations and wallpaper
• More games – download new games to your phone
• Video & Audio – download or stream video and music clips
• More themes – download a new look for your phone’s menus
• Media Album – online storage for your pictures and sounds
• Vodafone Mail – a single mailbox for all your email messages, voicemail and faxes
• Vodafone Messenger – Instant messaging on your mobile
• News – get the latest news reports and weather forecasts
• Sport – news, results, and latest scores
• Search – find what you need in Vodafone live!
Tip! Vodafone live! is growing and changing all the time, so these options may vary.
Keep checking it out to see what´s new.
110
This is the Internet version of the user's guide. © Print only for private use.
5.2
Internet
Setting up Internet and email
In order to use the Internet, and send and receive picture and email messages,
you need the following:
• A phone subscription that supports data transmission.
• Settings entered in your phone.
• You may also have to register as an Internet/email user with Vodafone Customer Care.
However, your phone has already been customized to give access to Vodafone live! –
Vodafone’s mobile Internet portal. You should already be registered, and do not need
to change or configure any settings. If you have problems connecting to Vodafone live!,
the Internet or using email, please contact your local Vodafone Customer Services or visit
Using Internet
Your phone has a browser that uses WAP (Wireless Application Protocol) or HTTP
(Hyper Text Transfer Protocol) to bring Internet to your mobile phone.
To select Internet profile
1. } Connectivity } Internet settings } Internet profiles.
2. Select the WAP/HTTP profile you want to use.
111
This is the Internet version of the user's guide. © Print only for private use.
To start browsing
Press the Vodafone live! key
on your phone, or scroll to Favourites, and select
a service or press More for the following:
• Go to one of your bookmarks: } Favourites } More } Bookmarks } Go to.
• Enter the address of a Web site: } Favourites } More } Enter address } New
address to enter a new Web page address or select one of the 10 latest entered
addresses. When you enter a Web page address, the normal http:// prefix is not
needed.
To stop browsing
Press More and select Exit browser.
Options when browsing
Press More to view different browsing options. The options may vary depending on the
site you are visiting.
The options menu always contains the following:
Send a message
• Exit browser – disconnect and go to standby.
• Downloading – list any suspended or ongoing downloads from the Web.
• Go to the homepage set for the current Internet profile.
• Bookmarks – add the site you are currently browsing to your list of bookmarks,
or view the list of bookmarks for the current profile. Select to stream music or videos.
• Enter address – enter the Web page address of a site you want to visit.
• History – list of previously visited sites.
If you highlight an email
address when browsing a Web
site, you can send a text
message to that address.
• Refresh page – refresh the contents of the Web page.
• Save – save the Web page or save a picture from the Web page.
• Send link – send a link to the current site to another phone.
112
This is the Internet version of the user's guide. © Print only for private use.
• Appearance – customize the appearance of the current Web page. Select whether
pictures should be displayed on the Web pages. Select whether sounds that are
available on the Web page should be played.
• Security status – display current security information.
• Make a call/End call – if your subscription supports it, you can make a call while
browsing the Internet by selecting Make a call. Select End call to end the call and
continue browsing.
Using bookmarks
You use bookmarks in your mobile phone just as you do with a PC Internet browser.
You can create and edit bookmarks.
To create a bookmark
1. Browse to a Web or WAP page.
2. } More } New bookmark.
To use a bookmark
1. } Favourites } More } Bookmarks.
2. You can now do the following:
• Highlight a bookmark } Go to to browse to the Web or WAP page you have defined
for the bookmark.
• Highlight a bookmark } More to choose from more options.
Downloading
You can download, for example, pictures, themes, games and ringtones, from Vodafone live!
directly to your phone.
113
This is the Internet version of the user's guide. © Print only for private use.
To download items
More download options
1. Press the Vodafone live! key on your phone. This will connect you directly
to Vodafone live!.
You can also download via
My items } Pictures or
Sounds. Selecting More
Pictures will connect you
directly to the Image Download
section of Vodafone live! (for
wallpapers, etc.). More Sounds
connects you to the Sound
Download section (for ringtones,
etc.). You can download games
via Games } More games.
This connects you to the
2. Click on the Downloads link, and choose the item you want to download.
Follow the instructions to start downloading.
3. Your phone will automatically guide you through the process of installing your
downloaded items.
Stored information
When browsing you can save information in your phone.
Note:
It is advisable to clear any sensitive information about previously visited Internet services.
This is to avoid a security risk if your phone is misplaced, lost or stolen.
Games Download section.
The following information can be saved:
• Web pages.
• Pictures from Web pages.
• Cookies – improve site access efficiency.
• Passwords – improve server access efficiency.
To save Web pages or pictures
1. When browsing, } More } Save
2. Select Picture on page and follow the instructions on the screen to save a picture
from the Web page. Select Web page to save the Web page.
Pictures are saved in the Pictures folder in My items and Web pages are saved in the
Web pages folder.
114
This is the Internet version of the user's guide. © Print only for private use.
To allow or clear cookies in your phone
1. } Connectivity } Internet settings } Cookies.
2. Select an option and confirm.
To clear the password list
1. } Connectivity } Internet settings } Clear passwords.
2. Select to confirm.
Using applications for Java™
You can run applications for Java on your phone. A number of applications for Java need
to connect to the Internet to receive information, for example, games that download
new levels from a game server or news applications that download instant news from
a web site.
You need an HTTP Internet profile to allow applications for Java to connect to the Internet.
Please contact Vodafone Customer Care for the correct settings.
To select a profile for Java
1. } Connectivity } Settings for Java™ } Internet profiles.
2. Select the HTTP profile you want to use.
Internet security
Your phone has support for both WAP and HTTP secure browsing. To activate a secure
connection to the WAP gateway you need to turn on security in your Internet profile.
If your Internet profile is an HTTP profile, the connection will be secure if the URL starts
with https://.
115
This is the Internet version of the user's guide. © Print only for private use.
Note:
Security for a connection between a WAP gateway and a service provider is the
responsibility of the service provider.
To turn on a secure connection (WAP)
1. } Connectivity } Internet settings } Internet profiles.
2. Highlight a profile, } More } Settings.
3. Turn on security.
Trusted certificates
To establish a secure connection when using certain Internet services, for example,
banking or shopping, you need certificates in your phone.
Trusted certificates are used to verify the WAP gateway that you are trying to connect
to. Your phone may already contain trusted certificates when you buy it or you may
be able to download them.
To check the certificates in your phone
1. } Connectivity } Internet settings } Security.
2. Select Trusted cert.
116
This is the Internet version of the user's guide. © Print only for private use.
5.3
Downloading
Change your phone whenever you want by downloading new polyphonic ringtones,
videos, games, applications and wallpaper from Vodafone live!
3G downloading
Download more
To download pictures and ringtones
1. } My items } Pictures.
When the 3G icon is displayed,
you will notice an immediate
difference – downloads are
significantly faster.
2. } More Pictures for images and wallpaper, or } Sounds } More Sounds
for ringtones and sounds.
3. Follow the instructions to download.
To set a downloaded sound as your new ringtone, } My items } Sounds } More
} Use } Set as ringtone.
To download games
1. } Games } More games.
2. Follow the instructions to download.
117
This is the Internet version of the user's guide. © Print only for private use.
live! Studio
5.4
Picture upload
With Vodafone live! you can save pictures in a Web-based album. This is useful if you
are running out of phone memory, or if you wish to share your pictures with friends
in a virtual album that they (and you) can access on the Web. You can upload a picture
in three ways.
To upload a picture
• } My items } Pictures, select a picture, More } Send } live! Studio.
• From the camera, Capture } Send } live! Studio.
• You can also upload a message by selecting a folder in Messages, highlight
a message, More } live! Studio.
Note:
Visit www.vodafone.com for details. This service is not available in all countries.
118
This is the Internet version of the user's guide. © Print only for private use.
5.5
Media player
The media player works as a music player and video player all in one. You can play music
and video clips that you receive in a picture message, or that you download to your phone.
The following are supported by the media player: MP3, MP4, 3GP and WAV (with 16 kHz
as maximum sample rate).
You can also stream music and videos from Web sites. When streaming, links have
to be 3GPP compatible.
Note:
Turn the media player off before using voice dialling. Scroll to and select the Media Player
and press
to turn off.
Playlists
To organize the media files that are stored in My items you can create playlists. A playlist
can contain music as well as video clips. Files in a playlist can be sorted by artist, title
or by the order the files were added to the playlist. You can add a file to more than one
playlist.
The playlists All music and All videos are automatically generated and contain all music
and video files that are stored in the phone memory and on the Memory Stick Duo.
You cannot delete or rename these playlists.
To create a playlist
1. } Media Player } More } New playlist } enter the name of the playlist } OK.
2. Select among the files that are available in My items. You can add several files at
a time and you can search folders. You can also add folders. All files in the selected
folders will be added to the playlist.
119
This is the Internet version of the user's guide. © Print only for private use.
To add files to a playlist
1. } Media Player, select a playlist } Open } More } Add media.
2. Select among the files that are available in My items. You can add several files at
a time and you can search folders. You can also add folders. All files in the selected
folders will be added to the playlist.
To delete files from a playlist
1. } Media Player, select a playlist } Open.
2. Select the file } More } Remove.
Note:
When you delete a file from the playlist, it is not deleted permanently from the phone’s
memory. You can add the file to another playlist.
To delete playlists
Play media files
} Media Player, select a playlist } More } Delete playlist.
You can also play individual
media files from the Sounds
folder in My items. However,
you can only play playlists from
the media player application.
Note:
When you delete a playlist, you do not delete any of the files in the playlist. You can add
those files to another playlist.
Music and video clips
To play music and videos
} Media Player and select a playlist } Open } Play. The playlist keeps on playing
until you press Pause or Stop.
120
This is the Internet version of the user's guide. © Print only for private use.
To change play mode
1. } Media Player } More } Play mode.
2. Select:
• Shuffle on to play the playlist files in random order.
• Loop on to restart the playlist when the last file has been played.
Note:
You can also change the play mode from within the playlists.
Media player control
• } Pause to pause the playback.
• Press
• Press
to skip forward to the next music track or video clip.
to skip back to the previous music track or video clip.
• Press and hold
• Press and
highlighted will not be selected until you press Stop } Play.
and
to fast forward or rewind when playing music tracks.
to scroll through the playlist during playback. Files that are
• When a video clip is paused, press and hold
to play the video in slow motion.
Media player options
} More to view the following options:
• New playlist – create a new playlist.
• Play mode – change the playback order of songs and videos. Select loop or shuffle.
• Equalizer – change the settings of the treble and bass when playing music.
• Rename – rename the playlist. You can only rename user-created playlists.
• Delete playlist – delete the playlist. Only the playlist is deleted; the files are still
listed in My items. You can only delete user-created playlists.
121
This is the Internet version of the user's guide. © Print only for private use.
Media options
When you have selected a playlist, } More to view the following options:
• Information – view information about the current track or video.
• Add media – add files or folders to the playlist.
• Minimize – minimize the media player and return to standby. The music continues
to play and you can use other applications and functions in the phone.
• Play mode – change the playback order of songs and videos.
• Equalizer – change the settings of the treble and bass when playing music.
• Sort – sort the playlist by artist, title or by the order files were added to the
playlist.
• Send song/Send video – send a sound or video file using Bluetooth wireless
technology, the infrared port, text or picture messages or email.
• Remove – remove the file from the playlist.
Video options
When you have selected a playlist, } More to view the following options:
• Information – view information about the current video.
• Play mode – change the playback order of videos.
• Send song/Send video – send a sound or video file using Bluetooth wireless
technology, the infrared port, text or picture messages or email.
122
This is the Internet version of the user's guide. © Print only for private use.
Online music and videos
You can view videos and listen to music that you find on a Web site by streaming them
to your phone. When browsing, and when you have found a link for streaming, the media
player will open automatically when the link is selected.
In order to stream you must have a data account. Your phone should be pre-configured
with a data account. If it is not, please contact your local Vodafone Customer Services
To select data account
1. Scroll to Connectivity } Streaming settings.
2. Select the data account you want to use.
To stream video and audio
1. } My items } Videos } Video & Audio.
2. Follow the instructions to stream.
Links for streaming can be saved as bookmarks in the phone.
To save streamed links as bookmarks
During streaming } Save bookmark.
To stream saved music and videos
1. } Favourites } More } Bookmarks.
2. Select a link to stream. The media player will open and play the streamed music
or video.
123
This is the Internet version of the user's guide. © Print only for private use.
124
This is the Internet version of the user's guide. © Print only for private use.
Connectivity
You can connect your phone using Bluetooth™ wireless
technology, the infrared port or by using the USB cable that
comes with the phone.
When your phone is connected to another device, for example
a PC or another phone, you can synchronize phonebook and
calendar items, or transfer content between the phone and the
PC or between the phones.
You can use Bluetooth wireless technology to connect
accessories to your phone, for example portable handsfree
equipment.
125
This is the Internet version of the user's guide. © Print only for private use.
Synchronizing
6.1
You can synchronize your phone contacts, appointments, tasks, notes and email messages
with similar programs in, for example, a PC or mobile phone using Bluetooth wireless
technology, the infrared port or a cable (synchronization with nearby devices).
Synchronization software for your PC is available on the CD that comes with the phone.
You can also synchronize with programs on the Internet using WAP or HTTP (remote
synchronization with Internet services).
on synchronization, or contact Vodafone Customer Care for more information about
synchronizing.
Note:
When using USB, make sure you only use the USB cable that comes with the phone.
To select sync order for names
} Phonebook } Options } Advanced } Sync. order to select the order in which
first and last name appear in the phone when you synchronize contacts.
Synchronization with nearby devices
Install the PC synchronization software from the CD that comes with your phone
refer to the PC synchronization software help.
126
This is the Internet version of the user's guide. © Print only for private use.
Remote synchronization with Internet services
Contact Vodafone Customer Care for more information about the services on the Internet
with which you can synchronize, and to receive username, password and addresses for
the different services. Vodafone may be able to send you the synchronization account
settings in a message. You need to have an Internet profile set in your mobile phone
To enter the remote synchronization settings
1. } Connectivity } Synchronization } New account. If you do not have an
account, you will be asked if you want to create an account. } Yes to create a
new account.
2. Enter a name for the new account } Continue. A list of options to enter will appear.
Add the server address of the synchronization server, a server username and a server
password. } OK when you have entered each setting.
3. Select New account and select the WAP or HTTP profile that you want to use for
the synchronization.
4. Select Remote initiation to set whether to allow the synchronization server or other
device to initiate a synchronization or not. You can also choose to always be asked.
5. Select Sync. interval to set how often you want the phone to automatically connect
to the server and start a synchronization.
6. Select Applications and select the applications that you want to synchronize,
for example, Phonebook } OK.
7. Select Application settings and select application. Enter the name of the database
and, if required, your username and password } OK.
8. Press
} Save to save your new account.
127
This is the Internet version of the user's guide. © Print only for private use.
6.2
Bluetooth™ wireless technology
Your phone has built-in Bluetooth™ wireless technology which makes it possible for
you to connect your phone wirelessly to other Bluetooth devices such as a handsfree,
PC or other phones.
You can, for example, have a conversation via a cordless Bluetooth handsfree or browse
the Internet, wirelessly connected via a mobile phone. You can automatically synchronize
information in your phone and your PC. You can also exchange, for example, business
cards, calendar items, pictures, sounds and themes.
Before you start
To communicate with another Bluetooth device, you first need to turn Bluetooth on, make
sure that your phone is visible and add the device to the list of devices in your phone.
You can exchange items without adding the device to the list. To synchronize with your
PC, and to browse the Internet, you also need to install software on your PC from the CD
that comes with your phone, or download it from www.SonyEricsson.com/support.
Bluetooth range
Your phone can communicate
with other Bluetooth devices
within a range of up to 10 to
may be improved if there are
no solid objects in between
your phone and the other
Bluetooth device.
Note:
Please check if local laws or regulations restrict the use of Bluetooth wireless technology.
If Bluetooth is not allowed, you must ensure that the Bluetooth function is turned off.
The maximum allowed Bluetooth radio output power in the phone is automatically
adjusted according to possible local restrictions. This means that the range may vary.
To turn Bluetooth on
} Connectivity } Bluetooth } Turn on.
129
This is the Internet version of the user's guide. © Print only for private use.
To add a device to your phone
1. } Connectivity } Bluetooth } My devices } New device. The Bluetooth function
of the other device must also be turned on.
2. Press Add and your phone will search for all types of available Bluetooth devices.
Press More if you want to select a specific type of device to search for.
3. The phone searches for Bluetooth devices. A list of available devices of the type
you selected is then displayed. Select a device.
4. If the device (for example, a headset) you are adding to your phone has its own
passcode, enter this passcode in your phone. If not, create a passcode of digits
yourself and enter it in both devices.
To manage your listed devices
1. } Connectivity } Bluetooth } My devices.
2. Then select a device from the list and press More to view a list of options.
Phone name
You can choose a name for your phone. This name is shown in other devices when your
phone is found, and it is also used for the infrared port.
To enter a phone name
} Connectivity } Bluetooth } Phone name.
Visibility
In order for your phone to be found when searched for by other Bluetooth devices, you
must make sure that Bluetooth is turned on and your phone is visible to other devices.
130
This is the Internet version of the user's guide. © Print only for private use.
To hide or show your phone when using Bluetooth
1. } Connectivity } Bluetooth } Visibility.
2. Select Show phone or Hide phone.
Sending and receiving items
To send or receive an item, for example, a contact from the phonebook or a picture taken
with the camera, using Bluetooth wireless technology, you need to make sure that the
devices are within range. After you select Bluetooth as the transfer method for sending,
a list of possible receiving devices is presented. First in the list will be the last device
you were in contact with and devices that have been previously added to your phone.
The phone also searches for other devices that are shown in the list.
To send an item
1. } Phonebook and select a contact, when contacts is default phonebook, More.
2. } Send contact } Via Bluetooth. The phone searches for devices.
3. Select the device you want to send the item to and press Send.
To receive an item
} Connectivity } Bluetooth } Turn on.
When you receive the item, follow the instructions on the screen.
Note:
Make sure that your phone is visible to other devices.
131
This is the Internet version of the user's guide. © Print only for private use.
Using the phone with a Bluetooth handsfree
To add a Bluetooth handsfree to your phone
} Connectivity } Bluetooth } Handsfree. The first time you add a handsfree,
Add a handsfree device to use with the phone? is displayed, press Yes.
If you already have a handsfree in your list of devices, } Connectivity } Bluetooth
} Handsfree } My handsfree } New handsfree, and press Add.
Transferring sound
When you are using a Bluetooth handsfree with your phone, you can choose where the
sound should be transferred during a call. You can also select where the sound should
be handled when answering an incoming call with the keypad.
To transfer sound when using a handsfree
1. During a call, press
and select Transfer sound.
2. Select to transfer sound either to the phone or to other handsfree devices that have
been added to your phone.
To direct sound when using a handsfree
1. } Connectivity } Bluetooth } Handsfree } Incoming call.
2. Select Place in phone or Place in h-free.
Remote control
You can use your phone as a remote control device to control applications on a PC.
For example, you can control a media player or Microsoft® PowerPoint® presentations.
132
This is the Internet version of the user's guide. © Print only for private use.
To select remote control
1. } Connectivity } Bluetooth } Remote control.
2. Select the configuration file you want to use and the PC you want to connect to.
File transfer
You can use a PC to view and transfer content contained in My items and on the
Memory Stick Duo. You can use the drag-and-drop functionality in your PC to:
• Transfer files from the phone to the PC.
• Transfer files from the PC to the phone.
• Delete files from the phone.
File browsing
You can browse and retrieve the files contained in other devices that support the server
role of the file transfer profile. To do this, you must first add the other device to your list
of My devices.
Note:
To check whether the device has support for this specific functionality, please refer
to the list of Bluetooth services available in the other device.
To browse files
1. } Connectivity } Bluetooth } My devices.
2. Select a device } Browse.
133
This is the Internet version of the user's guide. © Print only for private use.
Infrared port
6.3
You can use the infrared port to establish contact between your phone and a PC or another
device equipped with an infrared port. You can, for example, synchronize calendar items,
Note:
If you are connecting to a PC, please refer to its user documentation.
To turn the infrared port on
• From standby, press
or
} Turn on infrared (infrared is turned on for 10 minutes),
• } Connectivity } Infrared port } 10 minutes to turn on infrared for
10 minutes only.
To connect two devices.
1. Place your phone as in the picture. The infrared port on the phone must face the
infrared port on the other device.
2. Your phone now establishes contact with the other device.
To send an item using the infrared port (example: a contact)
1. Make sure that the infrared port of both devices is on. } Phonebook and select
a contact, when contacts is default phonebook.
2. } More } Send contact } Via infrared.
134
This is the Internet version of the user's guide. © Print only for private use.
6.4
Transferring files using the USB cable
When you connect your phone to a PC using the USB cable, you can view the phone’s
Memory Stick as a drive on the PC. Your phone has to be turned on.
Note:
When using USB, make sure you only use the USB cable that comes with the phone.
You can use the drag-and-drop functionality in your PC to:
• Transfer files from the phone to the PC.
• Transfer files from the PC to the phone.
• Move and organize files on the Memory Stick Duo.
• Delete files from the Memory Stick Duo.
Note:
Your PC needs to have one of the following operating systems to be able use this
feature: Windows® 2000, Windows ME, Windows XP and Mac OS X.
135
This is the Internet version of the user's guide. © Print only for private use.
136
This is the Internet version of the user's guide. © Print only for private use.
Settings
You can use settings to personalize your phone by changing
the appearance of the screen and changing the ringtone.
You can also use settings to protect your phone from
unauthorized use. Use the SIM card or phone lock features.
137
This is the Internet version of the user's guide. © Print only for private use.
Setup wizard
7.1
You can use the setup wizard to help you get started with the basic settings in your phone.
If you do not want help the first time you turn on your phone, you can choose to use the
wizard later. You can also select to start the wizard from the menu system at any time.
The wizard gives you tips on how to use the keypad and guides you through some basic
settings.
To start the setup wizard from the menu system
1. } Settings } the General tab } Setup wizard.
2. Select language for your phone.
3. To use the wizard } Yes and follow the instructions that appear to complete the setup.
138
This is the Internet version of the user's guide. © Print only for private use.
7.2
Time and date
You can also set the time and date without using the setup wizard. The time is always
displayed in standby.
To set the time and date
• } Settings } the General tab } Time & date } Time. Enter the time } Save.
• To set the time format (12-hour or 24-hour clock) } Format and select an option.
• You can set the date and date format in Settings } the General tab } Time & date
} Date.
Advanced time settings
In Settings } the General tab } Time & date you can set time zone and daylight
saving time. If you have activated Auto time zone, you are asked whether you want
to update the time when your phone changes network. If you press Yes, the time is
updated automatically.
139
This is the Internet version of the user's guide. © Print only for private use.
Start-up screen and power save
7.3
Start-up screen
When you turn your phone on or off, the start-up screen appears. You can also set your
own start-up screen.
To select a start-up screen
} Settings } the Display tab } Start-up screen and select a picture for the start-up
screen. You can also select no start-up screen at all, or go back to the original one.
Power save
Power save is designed to optimize standby time.
To set power save
} Settings } the General tab } Power save.
140
This is the Internet version of the user's guide. © Print only for private use.
7.4
Themes
You can change the appearance of the screen, for example, the colours and wallpaper,
by using themes. Your phone comes with some predefined themes. You cannot delete
these, but you can download new themes from Vodafone live!
To select or change a theme
} My items } Themes and select a theme.
Exchanging themes
You can exchange themes using Bluetooth wireless technology, the infrared port or email.
Please note that you are not allowed to exchange copyright-protected material.
To send a theme
1. } My items } Themes and select a theme } More } Send.
2. Select a transfer method.
To download a theme
1. } My items } Themes } More themes.
2. Follow the instructions on the screen.
To receive and save a theme
1. Open the message you received the theme in, or turn on Bluetooth or the infrared
port if these transfer methods are being used to send the theme.
2. When you receive the item, follow the instructions that appear on the screen.
141
This is the Internet version of the user's guide. © Print only for private use.
Ringtones and melodies
7.5
Your phone comes with a number of standard and polyphonic melodies which can be used
as ringtones. You can exchange melodies via Bluetooth wireless technology, the infrared
port or cable. Please note that you are not allowed to exchange copyright-protected
material.
Note:
If you want to use an MP3 file as a ringtone, you can only use copyright-protected files
specially designed as ringtones. Please consult Vodafone Customer Care for more
information. If you select an MP3 file as ringtone, you cannot use voice answering
To select a ringtone
} My items, select a folder which contains sounds, for example, Sounds, highlight
a sound file } More } Use } Set as ringtone, or } Settings } the Sounds & alerts
tab } Ringtone.
To turn the ringtone on or off
Press and hold
from standby. All signals except the alarm signal are turned on or off.
To set the ringtone volume
1. } Settings } the Sounds & alerts tab } Volume and press
or
to decrease
or increase the volume.
2. } Save to save the setting.
142
This is the Internet version of the user's guide. © Print only for private use.
To download a ringtone
1. } My items } Sounds } More Sounds.
2. Follow the instructions on the screen.
Specific ringtones for personal calls
If your subscription includes the Calling Line Identification (CLI) service, you can assign
Vibrating alert
You can choose to be notified of an incoming call by the buzzing of the vibrating alert.
You can set:
• On – all the time.
• On if in Silent – on when the ring volume is turned off or when you have set the
phone to silent.
• Off – all the time.
To set the vibrating alert
} Settings } the Sounds & alerts tab } Vibrating alert and select the setting you
want.
Sounds and alerts options
From Settings } the Sounds & alerts tab, you can set:
• Message alert – select how you want to be notified of an incoming message.
• Key sound – select what sound you want the keys to make when you press them.
143
This is the Internet version of the user's guide. © Print only for private use.
Profiles
7.6
Your phone has a number of predefined profiles to suit a certain environment. For example,
the ringtone is turned off in the Meeting profile. You can add accessories to, rename
or change these profiles.
You can reset all profile settings to the way they were set when you bought your phone.
Automatic activation
Some profiles, for example In car, are automatically activated when used with a specific
accessory. When the accessory is disconnected, the profile is changed back.
To select a profile
} Settings } the General tab } Profiles } Select profile.
To change a profile setting
} Settings } the General tab } Profiles } Edit profile and select the setting that
you want to change.
To rename a profile
} Settings } the General tab } Profiles } Edit profile } Profile name.
To reset all profile settings
} Settings } the General tab } Profiles } Reset profiles.
144
This is the Internet version of the user's guide. © Print only for private use.
7.7
SIM card lock
The SIM card lock protects your subscription, but not your phone itself, from unauthorized
use. If you change SIM cards, the phone still works with the new SIM card.
Most SIM cards are locked at the time of purchase. If the SIM card lock is on, you have
to enter a PIN (Personal Identity Number) every time you turn on your phone.
If you enter your PIN incorrectly three times in a row, the SIM card is blocked. This
is indicated by the message PIN blocked. To unblock it you need to enter your PUK
(Personal Unblocking Key). Your PIN and PUK are supplied by Vodafone.
To unblock your SIM card
1. When PIN blocked is displayed, enter your PUK } OK.
2. Enter a new four- to eight-digit PIN } OK.
3. Re-enter the new PIN to confirm } OK.
To edit your PIN
} Settings } the General tab } Locks } SIM lock } Change PIN.
To turn the SIM card lock on or off
1. } Settings } the General tab } Locks } SIM lock } Protection and select On or Off.
2. Enter your PIN } OK.
Note:
If the message Codes do not match appears, you entered the new PIN incorrectly.
If the message Wrong PIN appears, followed by Old PIN:, you entered your old PIN
incorrectly.
145
This is the Internet version of the user's guide. © Print only for private use.
Phone lock
7.8
The phone lock protects the phone against unauthorized use if it is stolen and the SIM
card is exchanged. It is not on when you buy the phone. You can change the phone lock
code (0000) to any four- to eight-digit personal code.
Phone lock on
If the phone lock is on, the message Phone locked appears each time you turn on the
phone. You have to enter your code followed by Yes to use your phone.
Automatic phone lock
If the phone lock is set to automatic, you do not need to enter your phone lock code until
a different SIM card is inserted in the phone.
Note:
It is important that you remember your new code. If you should forget it, you have to hand
in your phone to your local Sony Ericsson retailer.
To set the phone lock
1. } Settings } the General tab } Locks } Phone lock } Protection and select
an alternative.
2. Enter the phone lock code } OK.
To edit your phone lock code
} Settings } the General tab } Locks } Phone lock } Change code.
146
This is the Internet version of the user's guide. © Print only for private use.
More features
This chapter lists a number of useful features that are available
to you. For example, learn how to use the calendar and how
to use tasks.
You will also receive instructions on how to use the timer,
the alarm clock, notes and the calculator. Included in the
phone is also a feature that allows you to remember all your
codes; the code memo.
147
This is the Internet version of the user's guide. © Print only for private use.
Calendar
8.1
You can use the calendar to keep track of important meetings that you need to attend.
The calendar can be synchronized with a PC calendar or with a calendar on the Web
Appointments
You can save up to 300 appointments depending on the size of each item. You can choose
to add a new appointment or use an old one as a template by copying and editing it. You
can also set a reminder for an appointment.
To add a new appointment
1. } Organizer } Calendar and highlight the date for the appointment } Select
} New appointment } Add.
2. Enter date, subject, location and reminder. Confirm each entry.
View next appointment in the
external display
To view an appointment
1. } Organizer } Calendar and select a day on which you have an appointment
(marked in bold).
When the phone is closed,
simply press the
volume
button from standby.
2. Scroll to the appointment } View.
3. } More for options to reschedule, edit, send, copy or delete.
Find an appointment
You can search for appointments that contain a specific text.
148
This is the Internet version of the user's guide. © Print only for private use.
To search for appointments
1. } Organizer } Calendar } More } Advanced } Find.
2. Enter the text you want to search for } OK. Appointments that match your search are
shown. Select View to view your appointments or More for options to reschedule,
edit, send, copy or delete.
Exchanging appointments
You can send and receive appointments using Bluetooth wireless technology, the infrared
port or picture messages.
To send an appointment
In the list of appointments for a certain day, select the item you want to send } More
} Send and select a transfer method.
Receiving an appointment
When Add appointment? is displayed } Yes to save the appointment.
Reminder options
To set when reminders should sound
1. } Organizer } Calendar } More } Advanced } Reminders.
2. } Always if you want the reminder to sound even though the phone is turned off. When
the reminder sounds } Yes to read the appointment. } No to turn off the reminder.
Note:
A reminder option set in the calendar affects a reminder option set in tasks.
149
This is the Internet version of the user's guide. © Print only for private use.
Viewing your calendar
To view your calendar content } Organizer } Calendar. Days on which you have
appointments are marked in bold. } More } View week.
Navigating in your calendar
Use the navigation key to move between days or weeks. In the monthly and weekly views,
you can also use the keypad as follows.
Back a week
Back a month
Back a year
Today’s date
Next week
Next month
Next year
Calendar settings
} Organizer } Calendar } More } and select one of the options:
• View week – select, add, edit or delete appointments.
• New appointment – add a new appointment.
• Change date – change the date of your calendar.
• Advanced – for options to find, delete all, set reminders or select a start
day for the week.
150
This is the Internet version of the user's guide. © Print only for private use.
8.2
Tasks
You can keep track of phone calls you need to make or things that you need to do. You
can save up to 80 tasks depending on the size of each item. You can choose to add a
new task or use an old one as a template by copying and editing it. You can also set a
reminder for a task.
To add a new task
1. } Organizer } Tasks } New task } Add.
2. Select a category. If the category is a phone call, enter the phone number } Continue.
3. Enter a subject } Continue.
4. If you want to set a reminder for your task } Yes.
To set reminders
} Organizer } Tasks and select a task } More } Reminders.
Reminder options
} Always if you want the reminder to sound even though the phone is turned off. When
the reminder sounds } Yes to read the task, or to call the phone number in a phone task.
} No to turn off the reminder.
Note:
A reminder option set in tasks affects a reminder option set in the calendar.
151
This is the Internet version of the user's guide. © Print only for private use.
To view a task
} Organizer } Tasks and select a task } View.
Exchanging tasks
You can send and receive tasks using Bluetooth wireless technology, the infrared port
or picture messages.
To send a task
1. In the list of tasks for a certain day, select the item you want to send } More } Send.
2. Select a transfer method.
Receiving a task
When Add task? is displayed } Yes to save the appointment or task.
152
This is the Internet version of the user's guide. © Print only for private use.
8.3
More useful features
Alarm clock
The alarm can be set to ring at a specific time within 24 hours, or recurrently at a specific
time on several days. You can have both these alarms set at the same time. The alarm
signal rings even if the phone is set to silent or turned off.
To set an alarm
} Organizer } Alarms } Alarm and enter the time } Save.
Using the alarm
• To change the alarm time, } Organizer } Alarms } Alarm and enter a new time.
• To turn the alarm signal off when it rings, press any key. If you do not want the alarm
to be repeated } Turn off.
• To cancel the alarm } Organizer } Alarms } Alarm } Turn off.
• To set a recurrent alarm } Organizer } Alarms } Recurrent alarm. Enter the time
and select the days on which you want the alarm to recur by scrolling and pressing
Mark. } Done to exit the menu.
• To select an alarm signal } Organizer } Alarms } Alarm signal.
Notes
If you need to remember something, you can make a note of it in your phone. You can
save up to 10 notes.
To add a note
} Organizer } Notes } New note } Add and enter the note } Save.
153
This is the Internet version of the user's guide. © Print only for private use.
To handle the notes
1. } Organizer } Notes and a list of notes appears.
2. Select the note that you want to handle. } More to edit, show a note in standby
(or hide it), send or delete a note.
Exchanging notes
You can send and receive notes using Bluetooth wireless technology, the infrared port
To send a note
Organizer } Notes and select the note that you want to send } More } Send and select
a transfer method.
To receive a note
Add note? appears } Yes to save the note among your other notes.
Stopwatch
Your phone has a stopwatch that can save several laps. The stopwatch continues
to run when you answer an incoming call.
To use the stopwatch
1. } Organizer } Stopwatch } Start.
2. } Stop or } New lap if you want a lap time.
3. To reset the stopwatch } Reset.
Timer
Your phone has a built-in timer. When the signal rings, press any key to turn it off.
To set the timer
} Organizer } Timer and enter the hours, minutes and seconds after which you want
the timer to go off.
154
This is the Internet version of the user's guide. © Print only for private use.
Calculator
The phone has a calculator, which can add, subtract, divide and multiply.
To use the calculator
} Organizer } Calculator.
• Press
• Press
• Press
or
to select ÷ x - + % =
to delete the figure.
to enter a decimal point.
Code memo
Instead of having to remember all the different security codes for credit cards, for example,
you can save them in the code memo in your phone. Then all you need to remember
is the passcode to open the code memo. You can save a maximum of 10 codes in the
code memo.
Checkword and security
To confirm that you have entered the correct passcode for the code memo and to prevent
unauthorized access to your codes, you must enter a checkword.
When you enter your passcode to open the code memo, the checkword is shown for
a short time. If the passcode is correct, the correct codes are shown. If you enter the
incorrect passcode, the checkword and the codes that are shown are also incorrect.
Factors strengthening the security of the code memo function are:
• You get no feedback about whether the passcode is correct, except for the checkword,
and only you know the checkword.
• All codes are encrypted in the phone.
• When you access your codes, they are shown for a limited time only.
155
This is the Internet version of the user's guide. © Print only for private use.
To open code memo for the first time
1. } Organizer } Code memo. A message with instructions is displayed } Continue.
2. Enter a four-digit passcode to open code memo } Continue.
3. Re-enter the new passcode to confirm.
4. Enter a checkword (maximum 15 characters) } Done. The checkword can consist
of both letters and numbers. The next time you open the code memo, your checkword
appears after you enter the passcode, and then your added codes are shown.
To add a new code
1. } Organizer } Code memo and enter your passcode } New code } Add.
2. Enter a name associated with the code, for example, the name of the credit card
company } Continue.
3. Enter the code } Done.
To change the passcode
1. Open code memo as described above } More } Change passcode.
2. Enter your new passcode } Continue.
3. Re-enter the new passcode } Continue.
4. Enter a checkword } Done.
Forgot your passcode?
If you forget your passcode, just enter any passcode to access the code memo function.
The checkword and codes that are then shown are incorrect. You must now reset the
code memo.
156
This is the Internet version of the user's guide. © Print only for private use.
To reset code memo
1. } More } Reset.
2. Reset code memo? is displayed } Yes. The code memo is reset and all entries are
cleared. The next time you enter the code memo, you must start at %156 To open
code memo for the first time.
Torch light
You can use the light on the Motion Eye camera without using the camera or video recorder.
To turn on and off the light
When the phone is closed, press and hold
on, press to turn it off.
on the side of the phone to turn the light
When the phone is open, press
to turn the light on or off.
Note:
If you do not turn the light off, it will be deactivated after a while in order to save battery.
157
This is the Internet version of the user's guide. © Print only for private use.
Online services
8.4
Online services are customized services offered by network operators, independently
of mobile phones and mobile phone manufacturers.
A SIM card which supports online services works in the same way as a normal SIM card.
When you have inserted your SIM card and turned on the phone, your network operator
can download data to your SIM card. When you restart the phone after the first data
download, a new submenu appears under the menu.
Note:
This menu only appears if your SIM card supports this service. Your phone may not
support all of the services offered.
To enter your new menu system
} Connectivity } Online services. Some operators may not use the name Online
services.
158
This is the Internet version of the user's guide. © Print only for private use.
Troubleshooting
This chapter lists offers solutions to problems that you might
encounter while using your phone. Some problems require
that you call your service provider, but most of the problems
you can easily correct yourself.
However, if you need to hand in your phone for repair, please
note that you may lose information and content that you have
saved in your phone. You are advised to make a copy of such
information before handing your phone in for repair.
159
This is the Internet version of the user's guide. © Print only for private use.
Master reset
9.1
You can return the phone to its original state by deleting the changes that you have made
to settings, and the content that you have added or edited.
• If you select Reset settings, the changes that you have made to settings will be deleted.
• If you select Reset all, in addition to your changes to settings, all contacts, messages,
personal data, and content that you have downloaded, received or edited will also
be deleted.
To reset the phone
1. } Settings } the General tab } Master reset.
2. } Reset settings } Reset all.
3. Enter the phone lock code (0000 or the new code if you have changed it) } OK.
Note:
If you select Reset all, content such as melodies and pictures that you have downloaded,
received or edited are also deleted.
160
This is the Internet version of the user's guide. © Print only for private use.
9.2
Solutions
The phone cannot be switched on
No indication of charging
When you start charging a battery that is empty or a battery that has not been used for
a long time, it may take up to 30 minutes before the battery icon appears on the screen.
Menu language
If the screen shows a language that you do not understand, you can always choose
Automatic (determined by your SIM card) by pressing
8888
in standby. You can
always choose English by pressing
0000
in standby.
Grey menu options
Grey text indicates a function that is temporarily unavailable, for example, if a service
is not activated, or if your subscription does not support the function. Since you cannot
send themes, pictures and sounds that are copyright-protected, the Send menu
is sometimes unavailable.
Insert SIM
There is no SIM card in the phone or you may have inserted it incorrectly. Insert a SIM card.
Insert correct SIM card
The phone is set to work only with certain SIM cards. Insert the correct SIM card.
161
This is the Internet version of the user's guide. © Print only for private use.
Emergency calls only
You are within range of a network, but you are not allowed to use it. However,
in an emergency, some network operators allow you to call the international emergency
No network
There is no network within range or the received signal is too weak. You have to move
to get a signal that is strong enough.
Wrong PIN/Wrong PIN2
You have entered your PIN or PIN2 incorrectly. Enter the correct PIN or PIN2 } Yes.
Codes do not match
When you want to change a security code (for example your PIN) you have to confirm
the new code by entering it again. The two codes that you have entered do not match.
PIN blocked/PIN2 blocked
You have entered your PIN or PIN2 incorrectly three times in a row. To unblock,
PUK blocked
You entered your personal unblocking key code (PUK) incorrectly 10 times in a row.
Contact Vodafone Customer Care.
Phone locked
Phone lock code
Your phone comes with the phone lock code 0000. You can change it to any four- to eight-
162
This is the Internet version of the user's guide. © Print only for private use.
Number not permitted
The fixed dialling function is activated and the number you have dialled is not on your
Charging, alien battery
The phone cannot be detected by other users via Bluetooth™
Make sure that Bluetooth is turned on and that your phone is visible to other users,
163
This is the Internet version of the user's guide. © Print only for private use.
164
This is the Internet version of the user's guide. © Print only for private use.
List of icons shown in standby
10.1
Icon
Description
Icon
Description
Tells you the status of the battery
Press
to go to the desktop
A profile other than Normal has been selected
The 3G network is available
The card or phone lock is on. A secure Internet
connection is established
The 3G network signal is not available
Tells you the strength of the GSM network signal
GPRS is within range
The timer has been set and is on
The alarm clock has been set and is on
All signals are off, except the alarm and timer
The stopwatch is working in the background
The magic word is activated
GPRS is within range and can be used
A GPRS session is in progress
Tells you are in a premium charge zone
Speakerphone is activated
Ciphering is currently not being provided
by the network
A Java application is running
166
This is the Internet version of the user's guide. © Print only for private use.
Icon
Description
Icon
Description
Data is being downloaded to the phone
Line 2 is in use for outgoing calls
All incoming calls are diverted to a defined
number
Data is being uploaded from the phone
Bluetooth port is turned on
You are within your home zone
Bluetooth headset is connected to your phone
The infrared port is on
You have received a voice message
You have received a text message
You have received a picture message
You have received an email message
Infrared communication is in progress
You have missed an incoming call
An ongoing call
You have received a message via cell
broadcast
The media player is running
You have received a WAP push message
Your phone is receiving a picture message
Your phone is sending a picture message
You cannot receive any incoming calls
Line 1 is in use for outgoing calls
167
This is the Internet version of the user's guide. © Print only for private use.
Icon
Description
Your email client is sending or receiving email
One or more messages are waiting to be
downloaded from the server
One or more picture messages are waiting to
be downloaded from the server
Messenger status icon
168
This is the Internet version of the user's guide. © Print only for private use.
codes
copying
D
E
email
F
G
H
171
This is the Internet version of the user's guide. © Print only for private use.
I
M
Internet
messages
multitap text input
J
K
L
light
locks
N
number
172
This is the Internet version of the user's guide. © Print only for private use.
O
R
recording
P
passcodes
phonebook
S
picture upload
PIN code
saving
security
sending
173
This is the Internet version of the user's guide. © Print only for private use.
SIM card
T
T9™ Text Input
templates
turning on/off
U
unblocking
V
174
This is the Internet version of the user's guide. © Print only for private use.
W
writing
Z
175
This is the Internet version of the user's guide. © Print only for private use.
176
This is the Internet version of the user's guide. © Print only for private use.
Guidelines for Safe and Efficient Use
12.1
Please read this information before using your mobile phone.
Recommendations
• Always treat your product with care and keep it in a clean and dust-free place.
• Do not expose your product to liquid or moisture or humidity.
• Do not expose your product to extreme high or low temperatures.
• Do not expose your product to open flames or lit tobacco products.
• Do not drop, throw or try to bend your product.
• Do not close your product with an object inserted between keypad and display;
this may damage your product.
• Do not paint your product.
• Do not use your product near medical equipment without requesting permission.
• Do not use your product when in, or around aircraft, or areas posted “turn off two-
way radio”.
• Do not use your product in an area where a potentially explosive atmosphere exists.
• Do not place your product or install wireless equipment in the area above your car's
air bag.
• Do not attempt to disassemble your product. Only Sony Ericsson authorised personnel
should perform service.
Efficient use
Hold your mobile phone as you would any other phone. Do not cover the top of the phone
when in use, as this affects call quality and may cause the phone to operate at a higher
power level than needed, thus shortening talk and standby times.
178
This is the Internet version of the user's guide. © Print only for private use.
Radio frequency (RF), radio wave exposure and Specific
Absorption Rate (SAR) information
Your mobile phone is a low-power radio transmitter and receiver. When it is turned on, it
emits low levels of radio frequency energy (also known as radio waves or radio frequency
fields).
Governments around the world have adopted comprehensive international safety guidelines,
developed by scientific organizations, e.g. ICNIRP (International Commission on Non-
Ionizing Radiation Protection) and IEEE (The institute of Electrical and Electronics
Engineers Inc.) through periodic and thorough evaluation of scientific studies. These
guidelines establish permitted levels of radio wave exposure for the general population.
The levels include a safety margin designed to assure the safety of all persons,
regardless of age and health, and to account for any variations in measurements.
Specific Absorption Rate (SAR) is the unit of measurement for the amount of radio
frequency energy absorbed by the body when using a mobile phone. The SAR value is
determined at the highest certified power level in laboratory conditions, but the actual
SAR level of the mobile phone while operating can be well below this value.
This is because the mobile phone is designed to use the minimum power required to
reach the network.
Variations in SAR below the radio frequency exposure guidelines do not mean that there
are variations in safety. While there may be differences in SAR levels among mobile
phones, all Sony Ericsson mobile phone models are designed to meet radio frequency
exposure guidelines.
A separate leaflet with SAR information for this mobile phone model is included with
the material that comes with this mobile phone. This information can also be found,
together with more information on radio frequency exposure and SAR, on
179
This is the Internet version of the user's guide. © Print only for private use.
Driving
Please check if local laws and regulations restrict the use of mobile phones while driving
or require drivers to use handsfree solutions. We recommend that you use only Ericsson
or Sony Ericsson handsfree solutions intended for use with your product. Please note
that because of possible interference to electronic equipment, some vehicle manufacturers
forbid the use of mobile phones in their vehicles unless a handsfree kit with an external
antenna supports the installation.
Always give full attention to driving and pull off the road and park before making
or answering a call if driving conditions so require.
Personal medical devices
Mobile phones may affect the operation of cardiac pacemakers and other implanted
equipment. Please avoid placing the mobile phone over the pacemaker, e.g. in your breast
pocket. When using the mobile phone, place it at the ear opposite the pacemaker.
If a minimum distance of 15 cm (6 inches) is kept between the mobile phone and the
pacemaker, the risk of interference is limited. If you have any reason to suspect that
interference is taking place, immediately turn off your mobile phone. Contact your
cardiologist for more information.
For other medical devices, please consult the manufacturer of the device.
CHILDREN
DO NOT ALLOW CHILDREN TO PLAY WITH YOUR MOBILE PHONE OR ITS ACCESSORIES.
THEY COULD HURT THEMSELVES OR OTHERS, OR COULD ACCIDENTALLY DAMAGE
THE MOBILE PHONE OR ACCESSORY. YOUR MOBILE PHONE OR ITS ACCESSORY MAY
CONTAIN SMALL PARTS THAT COULD BE DETACHED AND CREATE A CHOKING HAZARD.
180
This is the Internet version of the user's guide. © Print only for private use.
Disposing of the product
Your mobile phone should not be placed in municipal waste. Please check local regulations
for disposal of electronic products.
Power supply
Connect the AC power adapter only to designated power sources as marked on the product.
Make sure the cord is positioned so that it will not be subjected to damage or stress.
To reduce risk of electric shock, unplug the unit from any power source before attempting
to clean it. The AC power adapter must not be used outdoors or in damp areas. Never
alter the cord or plug. If the plug will not fit into the outlet, have a proper outlet installed
by a qualified electrician.
Emergency calls
Mobile phones operate using radio signals, which cannot guarantee connection under
all conditions. Therefore you should never rely solely upon any mobile phone for essential
communications (e.g. medical emergencies).
Emergency calls may not be possible on all cellular networks or when certain network
services and/or mobile phone features are in use. Check with your local service provider.
Battery use and care
We recommend that you fully charge the battery before you use your mobile phone for
the first time. The battery can only be charged in temperatures between +5°C (+41°F)
and +45°C (+113°F).
A new battery or one that has not been used for a long time could have reduced capacity
the first few times it is used.
181
This is the Internet version of the user's guide. © Print only for private use.
The talk and standby times depend on the actual transmission conditions when using
the mobile phone. If the mobile phone is used near a base station, less power is required
and talk and standby times are prolonged.
• Warning! May explode if disposed of in fire.
• Use only Ericsson or Sony Ericsson branded original batteries and chargers intended
for use with your mobile phone. Other chargers may not charge sufficiently or may
produce excessive heat. Using other batteries and chargers could be dangerous.
• Do not expose the battery to liquid.
• Do not let the metal contacts on the battery touch another metal object. This could
short-circuit and damage the battery.
• Do not disassemble or modify the battery.
• Do not expose the battery to extreme temperatures, never above +60°C (+140°F).
For maximum battery capacity, use the battery in room temperature.
• Turn off your mobile phone before removing the battery.
• Keep out of children's reach.
• Use the battery for the intended purpose only.
• Do not allow the battery to be put into the mouth. Battery electrolytes may be toxic
if swallowed.
Disposing of the battery
Please check local regulations for disposal of batteries or call your local Sony Ericsson
Customer Care Center for information.
The battery should never be placed in municipal waste. Use a battery disposal facility
if available.
182
This is the Internet version of the user's guide. © Print only for private use.
12.2
LimitedWarranty
Sony Ericsson Mobile Communications AB, S-221 88 Lund, Sweden, (Sony Ericsson),
provides this Limited Warranty for your mobile phone and original accessory delivered
with your mobile phone (hereinafter referred to as "Product").
Should your Product need warranty service, please return it to the dealer from whom
it was purchased, or contact your local Sony Ericsson Customer Care Centre (national
Our warranty
Subject to the conditions of this Limited Warranty, Sony Ericsson warrants this Product
to be free from defects in design, material and workmanship at the time of its original
purchase by a consumer, and for a subsequent period of one (1) year.
What we will do
If, during the warranty period, this Product fails to operate under normal use and service,
due to defects in design, materials or workmanship, Sony Ericsson authorised distributors
or service partners, in the country/region* where you purchased the Product, will, at their
option, either repair or replace the Product in accordance with the terms and conditions
stipulated herein.
Sony Ericsson and its service partners reserve the right to charge a handling fee
if a returned Product is found not to be under warranty according to the conditions below.
Please note that some of your personal settings, downloads or other information may be
lost when your Sony Ericsson Product is repaired or replaced. At present Sony Ericsson
may be prevented by applicable law, other regulation or technical restrictions from
making a backup copy of certain downloads. Sony Ericsson does not take any
183
This is the Internet version of the user's guide. © Print only for private use.
responsibility for any lost information of any kind and will not reimburse you for any
such loss. You should always make backup copies of all the information stored on your
Sony Ericsson Product such as downloads, calendar and contacts before handing in
your Sony Ericsson Product for repair or replacement.
Conditions
1. The warranty is valid only if the original proof of purchase issued to the original purchaser
by an, for this Product, Sony Ericsson authorised dealer, specifying the date of purchase
and serial number**, is presented with the Product to be repaired or replaced.
Sony Ericsson reserves the right to refuse warranty service if this information has been
removed or changed after the original purchase of the Product from the dealer.
2. If Sony Ericsson repairs or replaces the Product, the repaired or replaced Product shall
be warranted for the remaining time of the original warranty period or for ninety (90)
days from the date of repair, whichever is longer. Repair or replacement may involve
the use of functionally equivalent reconditioned units. Replaced parts or components
will become the property of Sony Ericsson.
This warranty does not cover any failure of the Product due to normal wear and tear,
or due to misuse, including but not limited to use in other than the normal and
customary manner, in accordance with the Sony Ericsson instructions for use and
maintenance of the Product. Nor does this warranty cover any failure of the Product
due to accident, software or hardware modification or adjustment, acts of God or damage
resulting from liquid.
A rechargeable battery can be charged and discharged hundreds of times. However,
it will eventually wear out – this is not a defect. When the talk-time or standby time is
noticeably shorter, it is time to replace your battery. Sony Ericsson recommends that
you use only batteries and chargers approved by Sony Ericsson.
184
This is the Internet version of the user's guide. © Print only for private use.
3. Since the cellular system on which the Product is to operate is provided by a carrier
independent from Sony Ericsson, Sony Ericsson will not be responsible for the operation,
availability, coverage, services or range of that system.
4. This warranty does not cover Product failures caused by installations, modifications,
or repair or opening of the Product performed by a non-Sony Ericsson authorised person.
5. The warranty does not cover Product failures which have been caused by use
of accessories or other peripheral devices which are not Ericsson or Sony Ericsson
branded original accessories intended for use with the Product.
6. Tampering with any of the seals on the Product will void the warranty.
THERE ARE NO EXPRESS WARRANTIES, WHETHER WRITTEN OR ORAL, OTHER THAN
THIS PRINTED LIMITED WARRANTY. ALL IMPLIED WARRANTIES, INCLUDING WITHOUT
LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR
A PARTICULAR PURPOSE, ARE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY.
IN NO EVENT SHALL SONY ERICSSON OR ITS LICENSORS BE LIABLE FOR INCIDENTAL
OR CONSEQUENTIAL DAMAGES OF ANY NATURE WHATSOEVER, INCLUDING BUT NOT
LIMITED TO LOST PROFITS OR COMMERCIAL LOSS; TO THE FULL EXTENT THOSE
DAMAGES CAN BE DISCLAIMED BY LAW.
Some countries/states do not allow the exclusion or limitation of incidental or consequential
damages, or limitation of the duration of implied warranties, so the preceding limitations
or exclusions may not apply to you.
The warranty provided does not affect the consumer's statutory rights under applicable
legislation in force, nor the consumer's rights against the dealer arising from their sales/
purchase contract.
185
This is the Internet version of the user's guide. © Print only for private use.
*EUROPEAN UNION (EU)
If you have purchased your Product in an EU country you can have your Product serviced,
under the conditions set out above, within the warranty period in any EU country where
an identical Product is sold by an authorised Sony Ericsson distributor. To find out if your
Product is sold in the EU country you are in, please call the local Sony Ericsson Customer
Care Centre. Please observe that certain services may not be possible elsewhere than
in the country of original purchase, for example due to the fact that your Product may
have an interior or exterior which is different from equivalent models sold in other EU
countries. It may not be possible to repair SIM-locked Products.
** In some countries/regions additional information is requested. If so, this is clearly shown
on the valid proof of purchase.
FCC Statement
This device complies with Part 15 of the FCC rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may
cause undesired operation.
186
This is the Internet version of the user's guide. © Print only for private use.
12.3
Declaration of Conformity
We, Sony Ericsson Mobile Communications AB of
Nya Vattentornet
S-221 88 Lund, Sweden
declare under our sole responsibility that our product
Sony Ericsson type AAD-3021011-BV
and in combination with our accessories, to which this declaration relates is in
conformity with the appropriate standards 3GPP TS 51.010-1, 3GPP TS 34.121,
EN 301489-7, EN 301489-24, EN 300328, EN 301489-17 and EN 60950, following
the provisions of Radio Equipment and Telecommunication Terminal Equipment
directive 99/5/EC with requirements covering EMC directive 89/336/EEC, and
Low Voltage directive 73/23/EEC.
Lund, July 2004
0682
Hiroshi Yoshioka, Head of Product Business Unit GSM/UMTS
We fulfil the requirements of the R&TTE Directive (99/5/EC).
187
This is the Internet version of the user's guide. © Print only for private use.
|